![Rommelsbacher EKM 500 [30/32] Troubleshooting](/img/pdf.png)
Rommelsbacher EKM 500 [30/32] Troubleshooting
![Rommelsbacher EKM 500 [30/32] Troubleshooting](/views2/2010370/page30/bg1e.png)
30
Troubleshooting
Error Cause and corrective action
Appliance without function. • Check whether the mains plug is connected to the socket.
• If necessary check with another appliance, if the socket is functioning
properly.
Display shows “E01“ and there
is a beep.
Powder container not properly fi t and not engaged.
• Check whether the powder container is engaged properly.
Display shows “E02“ and there
is a beep.
The maximum runtime of the appliance is exceeded.
• Disconnect the mains plug from the socket and let the appliance
cool down for at least 5 minutes.
Display shows “b0“ and there
is a beep.
The scale does not show a weight change for 10 seconds.
(Only with portion- or weight-controlled grinding).
• Disconnect the mains plug from the socket.
• Check whether there are still coffee beans available in the beans
tank, if necessary refi ll.
• Check whether the powder outlet is blocked and thus no powder can
get into the powder container, if necessary clean outlet and grinder.
The powder outlet does not
supply any more ground powder.
The beans tank is empty.
• Switch off the appliance by pressing the button “On/Off“ and
disconnect the mains plug from the socket.
• Check whether there are still coffee beans available in the beans
tank, if necessary refi ll.
The powder outlet is blocked.
• Switch off the appliance by pressing the button “On/Off“ and
disconnect the mains plug from the socket.
• Check whether the powder outlet is blocked and thus no powder can
get into the powder container, if necessary clean outlet and grinder.
The powder outlet does not
supply any more ground powder
and there is an unpleasant
small when grinding.
The powder outlet is blocked.
• Switch off the appliance by pressing the button “On/Off“ and
disconnect the mains plug from the socket.
• Check whether the powder outlet is blocked and thus no powder can
get into the powder container, if necessary clean outlet and grinder.
The grinder is blocked and the
motor is still running.
There are small foreign objects (e.g. small stones) in the grinder
and the slip clutch has not yet been released.
• Switch off the appliance by pressing the button “On/Off“ and
disconnect the mains plug from the socket.
• Remove the foreign object by disassembling the chamber for the
grinder. Also clean the powder outlet. (See page 29 „Assembling /
disassembling the chamber of conical burr grinder“).
Содержание
- Produktbeschreibung product description 2
- Bedienfeld mit anzeigefeld control panel with display 3
- D inhaltsverzeichnis gb contents 4
- Einleitung 5
- Funktionen 8
- Standby modus 8
- Wissenswertes 8
- Einstellung des mahlgrades 9
- Integrierte waage 9
- Das gerät ist für eine maximale dauerbetriebszeit von 5 minuten ausgelegt ist diese zeit erreicht muss das gerät für mindestens 2 minuten abkühlen wird dies nicht beachtet kann der motor schaden nehmen 10
- Inbetriebnahme des gerätes 10
- Kegelmahlwerk mit blockierschutz 10
- Vor dem ersten gebrauch 10
- Bohnenvorratsbehälter aufsetzen abnehmen 13
- Siebträgerhalter montieren entfernen 14
- Mahlwerkgehäuse aus bzw einbauen 15
- Achtung verletzungsgefahr vor der reinigung immer den netzstecker ziehen basisgerät netzkabel und netzstecker nicht in wasser tauchen oder unter fließendem wasser reinigen 16
- Reinigung und pflege 16
- Hilfe bei der fehlerbeseitigung 17
- Introduction 18
- Functions 21
- Interesting facts 21
- Standby mode 21
- Integrated scale 22
- Setting the grinding degree 22
- Conical burr grinder with anti block system 23
- Operating the appliance 23
- Prior to initial use 23
- The appliance is designed for a max continuous operating time of 5 minutes if this time has been reached the appliance has to cool down for at least 2 minutes if this will not be observed the motor might be damaged 23
- Mounting dismounting the beans container 26
- Assembling disassembling the holder for portafilter 27
- Assembling disassembling of the chamber for grinder 28
- Cleaning and maintenance 29
- Warning hazard of injury always unplug the appliance before cleaning never immerse the appliance power cord and mains plug in water or clean them under running water 29
- Troubleshooting 30
- Service und garantie 32
Похожие устройства
- Smeg CTPS313X Руководство по эксплуатации
- Smeg CTP9015N Руководство по эксплуатации
- Smeg CTP1015 Linea Руководство по эксплуатации
- Smeg CPR715P Cortina Руководство по эксплуатации
- Smeg TSF02DGEU Dolce&Gabbana Руководство по эксплуатации
- Smeg CMS4604NR Dolce Stil Novo Руководство по эксплуатации
- Karcher KB 5 Premium (1.258-021.0) Руководство по эксплуатации
- Jura J6 Brilliant 15111 Руководство по эксплуатации
- Hyundai H-AR19-24H Руководство по эксплуатации
- Hitachi R-W722PU1INX Руководство по эксплуатации
- Hisense RC-67 WS4SAB Руководство по эксплуатации
- Hisense FC40DD4SA Руководство по эксплуатации
- Hisense RC-67 WS4SAW Руководство по эксплуатации
- Hisense FC-24DD4SA Руководство по эксплуатации
- Faber HEAVEN 2.0 X 90 110.0315.792 Руководство по эксплуатации
- Faber PAREO (SET) Руководство по эксплуатации
- Caso 2 Руководство по эксплуатации
- Caso HW 1000 Руководство по эксплуатации
- Bork J601 Руководство по эксплуатации
- Bork C533 Citiz&Milk Руководство по эксплуатации