Rommelsbacher MD 1000 Руководство по эксплуатации онлайн [51/56] 779043

Rommelsbacher MD 1000 Руководство по эксплуатации онлайн [51/56] 779043
51
The prepared dishes are
overcooked
Cooking time too long. Reduce the cooking time (see cooking table).
Steam pressure too high, try the lower steam pressure level.
Check whether the dishes are suitable for cooking with steam pressure.
The appliance does not
heat up.
Is the device correctly connected to the power supply?
Eventually the heating plate is defective, please contact your service point.
Water or steam leaks
out of the appliance
during the cooking
process.
Gasket ring
Check whether the gasket ring is placed correctly in the lid, if necessary
re-position it.
Check whether the gasket ring shows any damages, if necessary replace it.
Check whether there are soilings on the gasket ring, if necessary, clean it.
Check whether there are soilings on the bayonet lock of the lid resp. the
pressure pot, if necessary, clean it.
Steam outlet valve
Check whether the black valve cap is positioned well on the valve, if neces-
sary, re-position it.
Check whether the protective cap is positioned correctly on the valve, if
necessary, re-position it.
Check whether there are any soilings in the valve, if necessary, clean with a
pointed item (e. g. tooth pick made of wood - no metal).
Pressure valve for lid locking
Check whether the transparent valve cap shows any damages, if necessary,
replace it.
Check whether there are soilings at the sealing cap or at the valve bottom,
if necessary, clean it.
Steam cannot be
released by the steam
outlet valve
Press the button for the steam outlet valve for several times in order to
loosen possibly blockings.
Release pressure manually.
Let the appliance cool down, thus the pressure is reduced automati-
cally, however this may take some time!
or
Put on a heat-resistant glove or something similar.
Carefully lift the cap of the steam outlet valve at an angle with a long
object in order to release still existing pressure.
Lid is difficult to be
closed.
The gasket ring is not inserted properly, if necessary, readjust the gasket ring.
Safety bolt of the lid lock is blocked, if necessary, loose the blocking by
moving it back and forth.
Lid is difficult to be
opened or cannot be
opened.
There is still steam pressure in the appliance, if necessary, release steam by
pressing the button for the steam outlet valve.
Display “AUF“(open) /
“ZU“(closed)
Lid is not positioned properly on the appliance, if necessary, close lid pro-
perly by turning it clockwise until the stop.
Display “EC“ The chosen programme is not suitable for cooking with lid, remove the lid.
Display “E1“ to “E18“ Disconnect the appliance from the mains and let it cool down.
Check if mains voltage is correct and start again. If the error still occurs,
please contact your service point.

Содержание

Похожие устройства

Скачать