Al-Ko HTA 4245 POWERFLEX [19/192] Installation and start up

Al-Ko HTA 4245 POWERFLEX [19/192] Installation and start up
2500112_b 19
Installation and start-up
strength, changes in the colour or condition
of the skin. Normally these conditions affect
the fingers, hands or pulse. The risk increas-
es at low temperatures.
Take long breaks during your working day so
you can recover from the noise and the vibra-
tions. Plan your work in such a way that the
use of appliances that generate strong vibra-
tions is spread over several days.
If you notice an unpleasant sensation or disc-
olouration of the skin on your hands when us-
ing the tool, stop work immediately. Take suf-
ficient work breaks. Without sufficient breaks,
a hand/arm vibration syndrome can occur.
Minimise your risk of being exposed to vibra-
tions. Maintain the tool according to the in-
structions in the operating instructions.
If the tool is used frequently, contact your
dealer to purchase anti-vibration accessories
(e.g. handles).
Avoid working with the tool at temperatures
below 10°C. Define how the vibration load
can be limited in a work plan.
3.8.3 Noise pollution
A certain level of noise exposure from this appli-
ance is inevitable. Carry out noisy work at ap-
proved and specified time periods. Observe rest
periods as necessary and restrict the duration of
the work to a minimum. For your personal protec-
tion and protection of persons in the vicinity, ap-
propriate hearing protection must be worn.
4 INSTALLATION AND START-UP
4.1 Attaching the carrying belt to the basic
appliance
See "Multitool MT 42 – basic appliance" operat-
ing instructions.
4.2 Putting the attachment on the basic
appliance
See "Multitool MT 42 – basic appliance" operat-
ing instructions.
5 OPERATION
CAUTION!
Danger of burns
The gearbox housing becomes hot
during operation.
Do not touch the gearbox housing.
5.1 Turning the cutter head (02, 03)
The cutter head can be adjusted stepwise be-
tween -180° and +45° (02). This means it can be
adjusted as required for the work (03/a, 03/b).
WARNING!
Danger of cutting injuries
Danger of cutting injuries when reaching
into the cutting blade.
Always switch off the appliance be-
fore turning the cutter head.
1. Press and hold the unlock button (02/1).
2. Turn the cutter head (02/2) until it engages in
the required position.
3. Release the unlocking button (02/1).
5.2 Pulling off the protective cover (04)
1. Before switching on the appliance, pull the
protective cover (04/1) off the cutting blade
(04/2).
5.3 Switching the appliance on and off
See "Multitool MT 42 – basic appliance" operat-
ing instructions.
5.4 Oiling the cutting blade (05)
WARNING!
Danger of cutting injuries
Danger of cutting injuries when reaching
into the cutting blade.
Always switch off the appliance be-
fore oiling the cutting blade.
While working, perform the following tasks at reg-
ular intervals:
1. Oil the cutting blade (05/1) with environmen-
tally friendly lubricating oil (05/2).
This enables the cutting blade to run more easily,
it does not become hot and the battery life in-
creases.

Содержание

Похожие устройства

Скачать