Miniland Humitouch Pure [14/64] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Miniland Humitouch Pure [14/64] English

Miniland Humitouch Pure [14/64] English
14
4.1. HUMIDIFIER (Figure 1)
1. Nozzle
2. Water tank
3. Water tank opening
4. Water lter
5. Lid of water tank
6. Control panel
7. Base of the unit
8. Ultrasonic transducer
9. Air outlet
10. Essence compartment
11. Mains adaptor
12. Temperature and humidity sensor
13. Nightlight
14. Remote control
15. Additional sponges
4.1.2. CONTROL PANEL (Figure 2)
A. Level of vapour ow
B. Temperature
C. Timer hour
D. Relative humidity
E. Ozonator
F. Empty water tank
G. Adjustment of relative humidity
H. Power on/off
I. Adjustment of vapour release
J. Ozonator/nightlight
K. Adjustment of relative humidity
L. Adjustment of timer
4.1.3 REMOTE CONTROL (Figure 3)
I. Power on/off
II. Adjustment of vapour release
III. Ozonator/nightlight
IV. Adjustment of relative humidity
V. Adjustment of timer
4.2. PRINCIPLES OF OPERATION
The humidier uses the water stored in the water tank to make water vapour. The
machine’s fan system releases this vapour into the dry air, creating the necessary
humidity.
5. INSTRUCTIONS FOR USE
5.1. ADDING WATER (Figure 5)
It is recommended that user use distilled water for the rst time the humidier is
powered on. (Follow the instructions detailed in the Cleaning section).
To add water, follow the instructions below:
1. Place the device on a at surface. Remove the water tank (2) from the base of the
unit.
2. Hold the water tank (2) in an inverted position (upside down). Remove the lid from
the water tank (5), twisting it anti-clockwise.
3. Add cold water to the water tank. Do not add hot water, this could cause leakage.
4. Put the lid back on the water tank carefully and check that it is well fastened and that
there are no leaks.
5. Hold the water tank in a vertical position and place it back in the base. Place the
nozzle in the hole in the surface of the water tank.
NB:
1. Use the handle to move the full water tank, supporting it from below at the same time
with your free hand.
2. Do not add water directly to the base, this could damage the device or bring about
a dangerous situation.
3. Do not move the device when the water tank is totally full.
5.2. POWERING THE HUMIDIFIER ON AND OFF
Plug the humidier into the mains power supply and push the power on/off button
ENGLISH

Содержание

Похожие устройства

Скачать