Miniland Humitouch Pure [16/64] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Miniland Humitouch Pure [16/64] English

Miniland Humitouch Pure [16/64] English
16
ENGLISH
5.8. ADDING ESSENCES (Figure 4)
If you wish to add essences (not included), take out the tray of the essence compartment
(10) and pour enough essence on the sponge for it to be soaked (approximately ten
drops). Put the essence compartment back in its position.
NOTE:
• When it is cold, the windows and even the walls could fog up or allow frost to develop
due to excessive interior humidity. If this happens, reduce the adjustment (I, or II on
the remote control) of the vapour intensity to avoid damage due to the condensation
of the water.
• An excess of humidity in the room can cause the humidity to gather on the surfaces
where it could encourage the growth of bacteria and fungi. The accumulated humidity
could also damage the furniture and walls, especially wallpaper.
• In order to correct excessive humidity, especially in a small room, leave the door of
the room open and adjust the intensity of the vapour.
5.9. TROUBLESHOOTING
SYMPTOMS CAUSE ACTION
The humidier
does not work; it
releases neither
air nor vapour
It has not been connected
to the power supply
Connect the humidier to the
mains network
The humidier has not
powered on
Power on the unit by pushing
the button
The water tank is empty Fill the water tank
The water tank is not
correctly positioned on
the base
Make sure to correctly position
the water tank on the base.
Check that some air bubbles
appear when placing the water
tank on the base
The vapour has
an unpleasant
smell
The humidier is new Open the water tank and air
it off in a cool, dry place for
twelve hours
The water is dirty or has
been stored in the water
tank for a long time
Clean the water tank and ll it
with clean water
The vapour has
no essence
No essence has been
introduced or the sponge
is too dry
Add essence to the
compartment until the sponge
is soaked (approximately ten
drops)
The empty water
tank warning
lights up, but the
water tank is full
The water tank is too full Empty the water tank a little and
put it back in position
The water tank has not
been correctly positioned
on the base
Remove the water tank and
put it back in position correctly.
Check that some air bubbles
appear when placing the water
tank on the base

Содержание

Похожие устройства

Скачать