Dreame Bot Robot Vacuum and Mop D9 Pro Black [10/101] Routine maintenance

14 15

Clean the Dust Bin and Filter

Routine Maintenance

1. Open the robot cover, then press the dust bin clip to remove the

dust bin.

2. Open the dust bin cover as indicated by the diagram.

3. Remove the 󽗉lter and tap its basket gently.

4. Rinse the dust bin and 󽗉lter with water until they are clean.

Thoroughly dry the 󽗉lter before re-installing.

Note: Do not attempt to clean the 󽗉lter with a brush or 󽗉nger.

· Only clean water should be used to clean the 󽗉lter. Do not use detergent.

· Keep it in a well-ventilated or cool place.

Note:

Clean the Mopping Module

Routine Maintenance

1. Press the two release clips on the side of water tank, remove the

mopping module and pull the mop pad o󽗈 the mopping module.

3. Clean the mop pad with water only and leave to air dry before re-

installing.

2. Pour out the water in the tank. Clean with water only and leave to

air dry before re-installing.

4. If slow water 󽗊ow occurs, or the volume is not well-distributed,

please clean the air hole in the cover of the water tank.

Note: Do not expose the tank to the sun directly.

· Remove the pad from the mopping module before cleaning it, and make sure

dirty water does not 󽗊ow back into the water outlet to avoid clogging.

· For optimal performance, it is recommended to replace the mop pad every 3

to 6 months.

Note: