Home
Главная
Jimmy
Пылесосы вертикальные
Sirius Cordless Vacuum&Washer HW10
Руководство по эксплуатации Страница: 8

Jimmy Sirius Cordless Vacuum&Washer HW10 [8/108] Brushroll air path self cleaning function

Machine charging

Connect the adapter to the power supply, put the

upright vacuum cleaner into the charging base to

start charging.(Fig20)

Note:

1. Before the rst use, please fully charge the battery

pack, and before the second charge, please empty the

battery to ensure the life of the battery pack;

2. If the product is to be long idled, please charge it

once every three months;

3. When not charging, please remove the adapter from

the socket to prevent the danger of accidental touching.

Brushroll air-drying function

In the charging mode, press and hold the handle

mode button for 3 seconds to enter the brushroll

air-drying mode for 4 hours. During the air-drying

process, the decorative light is on, and the

brushroll will rotate slightly at intervals to adjust

the air-drying position; Press again mode button

to turn off the drying mode.

Note:This mode is designed to prevent humid brushroll

from breeding bacteria or odors. (The display is shown

in Fig21)

Brushroll & air path self-cleaning

function

In the charging mode, press the self-cleaning button to enter the cleaning mode (The display is

shown in Fig22).After the self-cleaning is completed, the machine enters brushroll air-drying mode

and returns to the charging mode; during the self-cleaning process, to end the self-cleaning mode in

advance , press on/off button and machine will return to charging mode.

Note:

1. Self clean mode is only to clean oorhead air path and hardoor brushroll. Do not run self clean on the carpet

brushroll.

2. Before turning on the self clean mode, please empty dirty water in the dirty water tank rst, check that the

machine has been rmly placed on the charging stand, the adapter is plugged into the socket and connected

to the charging stand. The clean water tank retains at least 1/2 water volume; After completing self cleaning,

please clean the dirty water tank again.

3. When the battery is less than or equal to 10% power, the self-cleaning mode cannot be turned on, and it can

be turned on normally after charging for a period of time.

Clean water tank empty indicator

When using the water spray function, the voice/screen shows "No clean water, ll in water" (Fig

23 and Fig24 alternately display), please turn off the machine and add water to the clean water

tank.When using the clea self clean mode, if it is detected that there is no water in the clean

water tank, the brushroll self cleaning will be stopped. To continue self cleaning, please add

water to the clean water tank and empty the dirty water tank, then restart self clean mode.

Note:When adding clean water, you can add the equipped JIMMY cleaning solution, the ratio is about 1 bottle

cap of cleaning solution to one full water tank, the water temperature cannot exceed 40°C.

Fill up clean water tank: After removing the clean water tank, open the water lling plug, turn it to the

side to expose the water inlet hole, pour clean water and cleaning solution in, and then plug back to

the original position and reinstall the clean water tank to oorhead. (Fig25)

Clean water tank

Water lling

plug

Jimmy Sirius Cordless Vacuum&Washer HW10 [8/108] Brushroll air path self cleaning function

Содержание

Похожие устройства