KRAFT Technology TCH-HDD8587SW [41/80] Automatic washing machine

USER GUIDE

AUTOMATIC WASHING MACHINE

Then press the Start/Pause button to start the program.

• Setting the «Down dryer» program

To dry down jackets, you should use the «Wash+Dry» program. Select the program

«Down jacket» + mode «Auto drying («Auto»)». For the best drying effect it is recom-

mended to dry one down jacket once.

The «Drying» mode is not suitable for drying down jackets.

Precautions:

• If there is too much moisture in the clothes, the machine will automatically increase

the drying time. It is normal if the display shows “0:20” for too long.

• The faucet must be turned on during the drying program, as water is needed for

cooling and drying during the drying program.

• The maximum drying time is set according to the mode.

• To avoid wrinkles due to excessive drying, the drying time is set a little less at first and

then added as necessary.

• Before starting the «Drying» program, it is recommended to start the spin cycle first. 6.

• If necessary, after spinning, untangle the clothes and then place them back in the

drying drum.

• Large and bulky items may not dry evenly in some areas. To completely dry clothes

after the drying cycle is complete, add the necessary drying time.

• Wool fabrics are not suitable for drying.

• Do not dry clothes that may deform or shrink.

• The drying function cannot be added to some programs.

ADDITIONAL FUNCTIONS

«Timer» function

Using this function you can set the end time of the washing (postpone the execution

of the program by the end of the cycle). The timer works in increments of one hour, the

maximum value is 24 hours.

After selecting the desired washing program and before pressing the “Start/Pause”

button, press and hold the “Timer” button until the desired time, e.g. “8h” (8 hours), is

displayed.

«K-SMART» function.

This function is capable of detecting the weight of laundry and combining different

times and wash temperature to perform a smart wash.

The K-Smart washing function can be connected in three ways:

— When the washing machine is off, press and hold the «K-Smart» button for at least

3 seconds: the washing machine immediately starts the K-Smart mode, with the

corresponding indicator light on the display.

— When the washing machine is on, press and hold the «K-Smart» button for at least

3 seconds: the washing machine will start the K-Smart directly starts the K-Smart

washing cycle, the relative light on the display will be on.

— When the washing machine is on, press briefly the «When the washing machine is