Aqara JY-GZ-03AQ [4/38] Installation and usage

Please confirm that communication between the Smart Smoke

Detector and the Aqara Zigbee 3.0 hub works normally, and then install

and fix it in position.

1.At least one detector should be installed in each independent room.

2. The detector should be installed in the middle of the roof, with at

least 0.5 meters away from any wall.

3. The detector should not be installed in the kitchen or near the water

heater with combustible smoke particles.

4. The detector should not be installed in places with massive moisture

or large amount of water vapor, such as bathrooms.

5. The detector should not be installed in places with too much dust.

6. The detector should not be installed near the fans, air conditioners,

fresh air entrances and exits where the wind speed is too fast.

7. The detector should not be installed at the corner of the wall or at

the top of the spire room with poor air flow.

8. The detector should not be installed near fluorescent lamps with

electromagnetic interference.

Installation and Usage

Installation Instructions