Liebherr WTes 5972-22 Vinidor [5/16] Appliance dimensions

• If several appliances are installed next to each other, leave a gap

of 50 mm between them.

If this gap is too narrow, condensation forms between the side

walls.

• Place the appliance in its final position

at the place of installation.

Extend the adjustable foot at the bottom

hinge bracket until it rests on the floor

and then make a further 90° turn.

• To adapt the height of the appliance to the surrounding furniture

a top unit can be added.

A gap of at least 50 mm depth must be provided behind and along

the entire width of this unit so as to ensure sufficient ventilation.

The area of ventilation underneath the ceiling should be at least

300 cm

Electrical connection

Only operate the appliance with alternating current (AC).

The permissible voltage and frequency are indicated on the type

plate. The position of the type plate is shown in the section entitled

Description of the appliance.

The socket must be properly earthed and protected by a fuse.

The tripping current of the fuse must be between 10 A and 16 A.

The socket must not be situated behind the appli-

ance and must be easily accessible.

Do not connect the appliance using an exten-

sion cable or extension socket.

Do not use stand-alone inverters (conversion

of direct current to alternating/three-phase

current) or energy-saving plugs. Risk of dam-

age to the electronic control system!

Appliance dimensions