Liebherr WTes 5972-22 Vinidor [7/16] Air exchange with activated charcoal filter

Liebherr WTes 5972-22 Vinidor [7/16] Air exchange with activated charcoal filter
21
EN
Interior light
The interior of the appliance is lit by an LED light strip at the top
of each compartment.
The interior light will always switch on when the appliance door
is opened.
The interior light will go out approx. 5 seconds after the door is
closed.
Press the Light button if you want the interior light to be
on even when the door is closed.
Note
This function applies to the lighting of both compartments.
Furthermore, the brightness of the lighting can be adjusted.
Press the Light button.
Press and hold the Light button
and at the same time press the
temperature setting buttons to in-
crease or decrease the brightness.
Note: The brightness will change in all compartments.
Air exchange with activated charcoal
lter
The way in which wines continue
to mature depends on the ambient
conditions. The quality of the air is
therefore decisive for preserving
the wine.
We recommend that you replace the
illustrated lter once a year. Filters
can be obtained from your dealer.
Changing the lter:
Take the lter by the handle. Turn it
90° to the left or right and remove.
Inserting the lter:
Insert with the handle in a vertical
position. Turn it 90° to the left or right
until it clicks into place.
Safety lock
The lock in the appliance door is
equipped with a safety mechanism.
Locking the appliance:
Insert the key as shown by arrow 1.
Turn the key 180°.
To unlock the appliance, the same
procedure must be repeated in the
same order.
Adjusting the display brightness
Press for 5 seconds. Display =
Display =
Display =
Use buttons Up and Down to select the
desired setting.
h0 = display lighting off
h1 = minimum brightness
h5 = maximum brightness
Display =
Exit setup mode by pressing the On/Off button.
The adjusted brightness will be activated after one minute.
Note
If a button is pressed, the display lights up for one minute at
maximum brightness.
When commissioning the appliance, the adjusted brightness will
only be active once the set interior temperature of the appliance
has been reached.
Setup mode
In set-up mode you can set the child lock and adjust the brightness
of the display. The child lock is designed to protect the appliance
from being switched o and the temperature setting from being
changed accidentally.
Activating the child lock
Press for 5 seconds. Display =
Display =
Display =
Exit setup mode by pressing the On/Off button.
Deactivating the child lock
Press for 5 seconds. Display =
Display =
Display =
Exit setup mode by pressing the On/Off button.

Содержание

Похожие устройства

Скачать