Home
Главная
Deerma
Увлажнители Воздуха
DEM-F800
Руководство по эксплуатации Страница: 3

Deerma DEM-F800 [3/8] How to use

Function Description

Power

1 2

1. Lift the water tank out.

2. Press the button to open the water gland outward.

3 4

3. Fill water into the water tank, and control the amount

of water according to demand.

4. Press the water gland down until "click".

5 6

5. Install the water tank filled with water onto the machine body.

6. Install the water tank filled with water onto the machine

body, plug it in, and turn the knob switch.

How to Use

1) The supply voltage must be equal to the rated voltage of

the product. If the supply voltage is inconsistent, please contact

the dealer, and do not use the product;

2) Please place the humidifier at room temperature for 30

minutes before using it, in case of damage to the water tank

caused by sudden temperature change;

3) Please use the machine at room temperature (5℃~40℃);

4) Please place the machine on a flat surface, and avoid tilting;

5) Please do not use the humidifier directly on the wood floor

to avoid the deformation and damage to the wood floor;

6) Please keep the humidifier 2 meters away from the furniture

and electrical appliances to avoid getting damp;

7) Keep the humidifier away from heat source and avoid direct

sunlight;

8) Do not fill hot water above 40℃ into the water tank and the

sink not to damage the machine;

9) Do not let the water flow from the air outlet into the body,

and clean water on the body with dry cloth not to damage the

machine;

10) When the room temperature is below 0℃, please pour

water out of the water tank and the sink to avoid freezing and

damage to the machine;

11) Do not put metal products, chemicals and detergents into

the sink, otherwise there will be a phenomenon of poor

atomization;

12) Power off and unplug before pouring water out of the

tank;

13) Power off and unplug if the humidifier needs to be moved,

cleaned or filled with water; do not move the machine at will

during working;

14) Do not fill water into the mist outlet and the air outlet;

15) When cleaning, prevent the water getting into the machine;

16) Do not disassemble the body parts at will.

(1) After plugging in, the machine is in the standby state;

(2) Turn the knob clockwise until a beep is heard, and the

humidifier is switched on and enters the low-position

operation state; continue to turn clockwise, the mist gradually

increases to the maximum; then continue to turn

counterclockwise, the mist decreases to the minimum until a

beep is heard, and the machine is powered off and exits the

working state;

(3) Water shortage protection: in the water shortage state, the

reed switch is automatically turned off, and then the machine

enters the standby state;

Note: Be sure to disconnect the power cord plug when the

machine is not working.

Precautions

Deerma DEM-F800 [3/8] How to use

Содержание

Похожие устройства