Kuppersberg KHT 616 Black [31/88] Fitted units

Kuppersberg KHT 616 Black [31/88] Fitted units
31
ENGLISH TECHNICAL PASSPORT
Вuilt-in compact electric oven
IMPORTANT INFORMATION
ABOUT INSTALLING
 This appliance is NOT intended
for use in a commercial environment.
 Please observe the installation
instructions provided and note that this
appliance should only be installed by
a quali ed technician.
 The appliance is tted with
a plug and must only be connected to
a properly installed earthed socket.
 In case a new socket is needed,
installation and cable connection
must only be done by a quali ed
electrician. If the plug is no longer
accessible following installation, a pole
disconnecting device must be present
on the installation site with a contact
gap of at least 3 mm.
 Adapters, multi-way strips and
extension cords must not be used.
Overloading can result in re.
 If the appliance is not tted with
a supply cord and a plug, the connection
equipment must have a contact
separation in all poles that provide full
disconnection, and the appliance must
be incorporated in the xed wiring in
accordance with the wiring rules.
FITTED UNITS
 This appliance is only intended
to be fully tted in a kitchen.
 This appliance is not designed
to be used as a tabletop appliance or
inside a cupboard.
 The tted cabinet must not have
a back panel behind the appliance.
 A gap of at least 45 mm must be
maintained between the wall and the
base and back panel of the unit above.
 The tted cabinet must have
a ventilation opening of 250 cm
2
on the
front. To achieve this, cut back the base
panel or t a ventilation grille.
 Ventilation slots and intakes
must not be covered.
 The safe operation of this
appliance can only be guaranteed if it
has been installed in accordance with
these installation instructions.
 The tter is liable for any damage
resulting from incorrect installation.
 The units into which the
appliance is tted must be heat-
resistant up to 95
o
C.

Содержание

Похожие устройства

Скачать