Sven MK-715 [4/14] Wireless microphones set

ENG

Wireless Microphones Set

CONNECTING THE RECEIvER

• Connect the signal cable (included) to the receiver jack AUDIO OUTPUT g and to the micro-

phone jack of the PC sound card or to the music center. If it is necessary, use adapter 6.3 mm

jack — 3.5 mm mini-jack.

• Connect the signal receiver to the mains and turn it ON. Central receiver power indicator c

will light up.

• Depending on which microphone is being used (A, B, or both) appropriate indicators will illu-

minate.

CONNECTING THE MICROPHONE

• Remove the microphone battery cover. Install the 6LR61 battery. Observe the polarity as indicated

on the receiver case.

• Set switch j to ON. If the microphone power indicator i, is not illuminated, please, replace thebat-

tery with a new one.

Note. For the best reception antenna А f and В e must be brought and installed in thever-

tical position.

• If the quality of microphone sound deteriorated, replace the microphone battery. Also try

tochange the position of the receiver antenna to achieve optimum performance.

• Remove the battery when you are not planning to use the microphone for a long time.

• If you turn o the microphone may cause unwanted noise.

Attention! Protect the unit from direct sunlight and moisture. Keep it away from electromag-

netic waves. Do not hold the microphone to the speaker, and to each other.