Kuppersberg GFM 4275 GW [45/112] Loading the salt into the softener

Kuppersberg GFM 4275 GW [45/112] Loading the salt into the softener
45
ENGLISH TECHNICAL PASSPORT
Dishwasher
USING YOUR DISHWASHER
LOADING THE SALT INTO THE SOFTENER
A. Remove the basket and then
unscrew and remove the cap from the
salt container.
B. Before rst wash, add 1lt. of water
in the salt container of your machine.
C. Place the end of the funnel (if
supplied) into the hole and introduce
about, 0.13kg of salt. It is normal for a
small amount of water to come out of
the salt container.
D. After lling the container, screw
the cap tightly back clockwise.
after the salt container has been
lled with salt.
E. Usually, the salt warning light will
be cease to be illuminated within 2-6
days after the salt container has been
lled with salt.
F. Immediately after lling the
salt into the salt container, a washing
programme should be started (Suggest
choose rapid program). Otherwise lter
system, pump or other important parts
of the machine may be damaged by
salty water. It is out of warranty.
NOTE:
 The salt container must only be
relled when the salt warning light in
NOTE.
If your model have no water softener,
you may skip this section.
WANING
Only use salt specifically designed
for dishwashers use!
Every other type of salt not
specically designed for dishwasher
use, especially table salt, will damage
the water softener. In case of damages
caused by the use of unsuitable salt
the manufacturer does not give any
warranty nor is liable for any damages
caused.
Only fill with salt before running a
cycle.
This will prevent any grains of salt
or salty water, which may have been
spilled, remaining on the bottom of the
machine for any period of time, which
may cause corrosion.

Содержание

Похожие устройства

Скачать