Kuppersberg GFM 4275 GW [46/112] Adjusting salt consumption

Kuppersberg GFM 4275 GW [46/112] Adjusting salt consumption
46
TECHNICAL PASSPORT ENGLISH
Dishwasher
the control panel comes on. Depending
on how fully the salt dissolves, the
salt warning light may still be on even
though the salt container is lled.
 If there is no salt warning light
in the control panel (For some Models),
you can judge when to load the salt
into the softener by the cycles that the
dishwasher had run.
 If there are spills of the salt, a
soak or a rapid program should be run
to remove the excess salt.
ADJUSTING SALT
CONSUMPTION
 Please follow the steps below for
adjustment in salt consumption.
 Step 1: Enter the status of salt
adjustment
Close the door, within 60 seconds
after power on, press Rapid button and
hold for 5 seconds, the machine will
enter setting mode.
 Step 2: select a certain level of
salt consumption
Press the Rapid button to select
the proper set according to your local
environment, the sets will change in the
following sequence:
H1->H2->H3->H4->H5->H6.
 Step 3: Exit the status of salt
adjustment
Without any operation in ve seconds,
the machine will exit from set mode, the
machine is into standby status.
There are 6 levels of salt consumption in all. It is recommended to select the
level according to below table:
WATER HARDNESS
Water
softener
level
Regeneration
occurs
every X
program
sequence
Salt
consumption
(gram/cycle)
German
dH
French
fH
British
Clarke
Mmol/l
0–5 0–9 0–6 0–0,94 H1
No
regeneration
0
6–11 10–20 7–14 1,0–2,0 H2 10 9
12–17 21–30 15–21 2,1–3,0 H3 5 12
18–22 31–40 22–28 3,1–4,0 H4 3 20
23–34 41–60 29–42 4,1–6,0 H5 2 30
35–55 61–98 43–69 6,1–9,8 H6 60 60
1°dH=1.25 °Clarke=1.78 °fH=0.178mmol/l
The factory setting: H3
Every cycle with a regeneration operation consumes additional 0.5 litres of water, the energy
consumption increases by 0.01 kWh and the programme extents by 4 minutes.

Содержание

Похожие устройства

Скачать