Kuppersberg GFM 4275 GW [60/112] Connection of drain hoses

TECHNICAL PASSPORT ENGLISH

Dishwasher

Fix the drain pipe with suction cups

или

Fix the drain pipe with the back

pipe of the machine.The interface

is tted with clamps and tightened

with a screwdriver.

Insert the drain hose into a drain

pipe with a minimum diameter of 4 cm,

or let it run into the sink, making sure

to avoid bending or crimping it. The

height of drain pipe must be less than

1000mm. The free end of the hose must

not be immersed in water to avoid the

back ow of it.

Please securely ﬁx the drain hose

in either position A or position B.

How to drain excess water from

hoses

If the sink is 1000 higher from the

oor, the excess water in hoses cannot

be drained directly into the sink. It will

be necessary to drain excess water from

hoses into a bowl or suitable container

that is held outside and lower than the

sink.

Water outlet

Connect the water drain hose. The

drain hose must be correctly tted to

avoid water leaks. Ensure that the water

drain hose is not kinked or squashed.

Extension hose

If you need a drain hose extension,

make sure to use a similar drain hose.

It must be no longer than 4 meters;

otherwise the cleaning effect of the

dishwasher could be reduced.

Syphon connection

The waste connection must be at

a height less than 100 cm (maximum)

from the bottom of the dish. The water

drain hose should be xed .

CONNECTION OF DRAIN HOSES