Kuppersberg GFM 6073 [90/152] Changing the program mid cycle

Kuppersberg GFM 6073 [90/152] Changing the program mid cycle
90
TECHNICAL PASSPORT ENGLISH
Dishwasher
STARTING A CYCLE WASH
1. Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket rst, then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refer to last page «Product
che». Make sure that the water supply is turned on to full pressure.
4. Open the door, Press the power button.
5. Choose a program, the response light will turn on. Then close the door, the
dishwasher will start its cycle.
CHANGING THE PROGRAM MID
-
CYCLE
A wash cycle can only be changed if it has been running for a short time
otherwise, the detergent may have already been released and the dishwasher may
have already drained the wash water. If this is the case, the dishwasher needs to be
reset and the detergent dispenser must be relled.
To reset the dishwasher, follow the instructions below:
1. Press the Start/Pause button to pause the washing.
2. Press the Program button for more than 3 seconds, the dishwasher will enter
standby mode.
3. Press the Program button to select the desired program.
4. Press the Start/Pause button, the dishwasher will run after 10 seconds.
3 sec

Содержание

Похожие устройства