Home
Главная
Brayer
Кофеварки Рожкового Типа
BR1112
Руководство по эксплуатации Страница: 10

Brayer BR1112 [10/64] Making cappuccino

MAKING CAPPUCCINO

ATTENTION!

Be careful to avoid burns by the released hot steam.

• Make an espresso co󰀨ee using a cup that has room

to add milk froth.

• Make sure that the steam control knob (8) «

» is

in the utmost position «●».

• Press the steam supply button (16) «

» and wait

until the button (16) indicator glows constantly.

Place any suitable bowl under the tip (10) for water.

Carefully turn the steam supply knob (8) « »

counterclockwise for a quarter of a turn to remove the

condensed uid from the cappuccinator pipe (9).

• After removing the condensed uid close the steam

supply by turning the knob (8) « » clockwise

until bumping «●».

Note:

- when the steam supply is switched on, the button

(16) indicator «

» will ash periodically and

glow constantly, indicating that the water is being

heated in the boiler;

- some water or steam may appear from the lter

holder (5), it is normal.

• Put the tip (10) of the cappuccinator pipe into a glass

with cold milk or cream, carefully turn the steam

supply control knob (8) « » counterclockwise

for a quarter of a turn or more. The tip (10) should

not touch the bottom of the glass, as this can hinder

- If you need to promptly remove the lter holder

(4), you have to reduce the pressure in the boiler,

switch the co󰀨ee maker o󰀨 by pressing the on/o󰀨

button (14) «

», place a suitable cup under

the tip (10) and slightly open the steam supply by

turning the knob (8) «

» counterclockwise.

After the pressure in the boiler is released, you

can remove the lter holder (4).

- repeated making of co󰀨ee should be performed

after at least 5 min interval.

ESPRESSO PORTION SETTING

• To enter the setting mode, press and hold the water

supply button (15) «

» for 3 seconds. The button

(15) indicator will start ashing. Press and hold the

button (15) «

» again. After a cup is lled with

necessary amount of water, press the button (15) «

» to nish setting. Maximal time of water supply is

15-60 seconds.

RETURN TO THE FACTORY SETTINGS

• Switch the co󰀨ee maker on and wait for preheating,

the button (15) indicator «

» will glow constantly.

• Simultaneously press and hold the buttons (14)

» and (15) « » for 3 seconds, the buttons

(14 and 15) indicators will ash 3 times, after that the

co󰀨ee maker will return to the factory settings.

Brayer BR1112 [10/64] Making cappuccino

Содержание

Похожие устройства