Home
Главная
Brayer
Кофеварки Рожкового Типа
BR1112
Руководство по эксплуатации Страница: 9

Brayer BR1112 [9/64] Making espresso

• Wait until the button (15) indicator stops ashing and

glows constantly, then switch the water supply on by

pressing the button (15) «

», after 15-20 seconds,

press the button (15) «

» again to switch the water

supply o󰀨, drain water from a cup.

• Preheating is over.

MAKING ESPRESSO

ATTENTION! When making co󰀨ee do not leave the

operating co󰀨ee maker unattended, as it is necessary to

watch the cup being lled with ready co󰀨ee!

AFTER PREHEATING:

• Make sure that the steam supply is closed. To do this

turn the knob (8) «

» clockwise until bumping

«●».

• Remove the lter holder (5) by turning the handle (3)

to the left «Insert» and remove the lter holder (5).

• Put ground co󰀨ee in the lter (5), slightly tamp the

ground co󰀨ee with the back side of the measuring

spoon (17).

• Install the lter holder (4) into the co󰀨ee maker. The

holder (4) ledges should match the grooves on the

boiler «Insert», after that turn the lter holder handle

(3) to the right until bumping «Lock».

• Wait until the indicator (11) lights up, the co󰀨ee

maker is ready for making co󰀨ee.

• Switch the water supply on by pressing the button

(15) «

», watch the cup lling with the ready

co󰀨ee, press the button (15) «

» again to switch the

water supply o󰀨.

Notes:

- when you press the button (15) «

», the pump

will switch on for 3 seconds to pre-wet the ground

co󰀨ee in the lter (5), after a three-second pause,

the pump will switch on and will work until it is

switched o󰀨 by pressing the button (15) «

again;

- the pump operation time is limited to 60 seconds,

if during this time the cup is not lled with ready

co󰀨ee, switch the water supply on again by

pressing the button (15) «

».

• Switch the co󰀨ee maker o󰀨 by pressing the on/o󰀨

button (14) « », the button (16) indicator will

go out.

• Wait until the co󰀨ee maker cools down and remove

the lter holder (5) by turning the handle (4) to the left

«Inser». Remove the ground co󰀨ee remnants and

wash the lter (6).

• For easy removing of the co󰀨ee remnants use the

retainer on the handle (3) to prevent the lter (5) from

falling o󰀨 the holder (4).

Notes:

- the cups should be preliminary heated up, when

water heats up in the boiler, put the cups on the

tray (7).

Brayer BR1112 [9/64] Making espresso

Содержание

Похожие устройства