Home
Главная
Brayer
Кофеварки Рожкового Типа
BR1112
Руководство по эксплуатации Страница: 13

Brayer BR1112 [13/64] Attention

12. Press the steam supply button (16) « » and wait

until the button (16) indicator stops ashing and

glows constantly. Put a suitable bowl under the tip

(10) and slightly open the steam supply by turning

the knob (8) « » counterclockwise. Carefully

turn the knob (8) « » to the maximal steam

release position «●», release the steam for about

1 minute, then close the steam by turning the knob

(8) « » clockwise until bumping and switch the

steam supply o󰀨 by pressing the button (16) «

».

13. Switch the co󰀨ee maker o󰀨 by pressing the on/o󰀨

button (14) « ». Wait for 10-15 minutes.

14. Perform the steps 10 and 11 at least 3 times.

15. Repeat the cleaning procedure for the steam

release channels described in the paragraph 12.

16. With small intervals, repeat the boiler cleaning

procedure (paragraph 10) until the citric acid

solution dissolves in the tank (13) completely.

17. Switch the co󰀨ee maker o󰀨 by pressing the on/o󰀨

button (14) « ».

18. Fill the water tank (13) with clear water until

maximal level and repeat the steps 10, 12 at least 3

times without the 10-15 minute break.

19. Switch the co󰀨ee maker o󰀨 by pressing the on/o󰀨

button (14) « ».

Note: to remove the scale you can use special

descaling agents for co󰀨ee makers and co󰀨ee

machines, strictly following the instructions on their

usage.

ATTENTION!

• You can temporarily switch o󰀨 the reminder to clean

the co󰀨ee maker from mineral deposits. To do this,

simultaneously press and hold the buttons (15) «

» and (16) « » for 3 seconds, the buttons (15 and

16) indicators will quickly ash 3 times, after that

you can, for example, make co󰀨ee, but after making

co󰀨ee, the co󰀨ee maker will again remind you to

remove mineral deposits by ashing light indicators

(14, 15, 16).

• Do not delay the co󰀨ee maker descaling for a long

time and perform the cleaning as soon as possible.

CLEANING THE COFFEE MAKER

• If there is ground co󰀨ee scale remainin in the lter (5)

openings, clean the lter (5) with a small brush.

• Wipe the co󰀨ee maker body with a soft, slightly

damp cloth and then wipe the co󰀨ee maker body (11)

dry. Do not use abrasives and solvents to clean the

co󰀨ee maker body.

• Do not immerse the co󰀨ee maker body (11), the

power cord and the power plug into water or any

other liquids.

• Wash the removable parts of the co󰀨ee maker with

warm water and neutral detergent, then rinse them

and dry.

Brayer BR1112 [13/64] Attention

Содержание

Похожие устройства