![Centek CT-1957 Инструкция по эксплуатации онлайн [39/52] 810069](/img/pdf.png)
Centek CT-1957 Инструкция по эксплуатации онлайн [39/52] 810069
![Centek CT-1957 Инструкция по эксплуатации онлайн [39/52] 810069](/views2/2041851/page39/bg27.png)
38
INSTALLATION LOCATION AND SURROUNDING
1. All washing and additional substances are to be kept in a safe place out of
the reach of children.
2. Do not install the machine on a carpet floor. The obstruction of the openings by
a carpet can damage the machine.
3. Keep the appliance clear from heating sources and direct sunlight to avoid
plastic and rubber parts to corrode.
4. Do not use the appliance in humid environments or rooms containing explosive
or caustic gas. In case of water leakage or water splashes let the appliance
dry in the open air.
5. The appliance must not be installed behind a lockable door, a sliding door or a
door with a hinge on the opposite side to that of the washing machine.
6. Do not operate the machine in rooms with a temperature of below 5 °C. This
can cause damages to parts of it. If it is unavoidable, make sure to drain the
water completely from the appliance after every use to avoid damages caused
by frost.
7. Never use flammable sprays or substances in the immediate proximity of the
appliance.
INSTALLATION
1. Remove all packaging material and transport bolts before using the appliance.
Otherwise, serious damage may result.
2. This appliance is equipped with a single inlet valve and can be connected to
the cold water supply only.
3. Mains plug must be accessible after installation.
4. Before washing clothes for the first time, the product shall be operated once
throughout all the procedures without any clothes inside.
5. Before using the washing machine, the product shall be calibrated.
6. Do not put any excessively heavy objects on the appliance, like water
containers or heating devices.
7. The new hose-sets supplied with the appliance are to be used and that old
hose-sets should not be reused.
8. Max. Inlet water pressure 1 MPa. Min. inlet water pressure 0.03 MPa.
ELECTRICAL CONNECTION
1. Make sure the supply cable is not trapped by the machine, it can get damaged.
2. Connect the product to a grounded outlet protected by a fuse complying with
the values in the «Technical specifications» table. The grounding installation
has to be made by a qualified electrician. Ensure that the machine is installed
in accordance with the local regulations.
3. Water and electrical connections must be carried out by a qualified technician
in accordance with the manufacturer‘s instructions and local safety
regulations.
ATTENTION
– Don´t use multiple plugs or extension cords.
– The appliance must not have an external switching device such as a timer or
connected to a circuit that is regularly switched on and off.
– Do not pull the plug out of the mains outlet if there is flammable gas around.
– Never pull out power plug with wet hands.
– Always pull at the plug, not at the cable.
– Always unplug the appliance if it is not being used.
WATER CONNECTIONS
1. Check the connections of the water inlet tubes, the water tap and the
outlet hose for possible problems due to changes of water pressure. If the
connections loosen or leak close the water tap and get it repaired. Do not use
the appliance before the pipes and hoses are installed properly by qualified
persons.
2. Glass door may become very hot during the operation. Keep children and pets
far away from the machine while it is operating.
3. The water inlet and outlet hoses have to be safely installed and remain
undamaged. Otherwise, water leakage can occur.
4. Do not remove the drain pump filter while there is still water in the appliance.
Big quantities of water can leak out, and there is a risk of scalding due to
hot water.
OPERATION AND MAINTENANCE
1. Never use any flammable, explosive or toxic solvents. Do not use gasoline
and alcohol etc. as detergents. Only select detergents that are suitable for
machine washing.
2. Make sure that all pockets are emptied. Sharp and rigid items such as
coins, brooches, nails, screws, stones etc. may cause serious damages to
this machine.
3. Remove all objects from pockets such as lighters and matches before use
the appliance.
4. Thoroughly rinse items that have been washed by hand.
5. Items that have been soiled with substances such as cooking oil, acetone,
alcohol, petrol, kerosene, spot removers, turpentine, wax and wax removers
should be washed in hot with an extra amount of detergent before being
dried in the appliance.
6. Items containing foam rubber (latex foam), shower caps, water proof textiles,
rubber backed articles and clothes or pillows fitted with foam rubber pads
should not be dried in the machine
7. Fabric softeners or similar products should be used as recommended in their
instructions.
8. Never try to open the door forcefully. The door will unlock shortly after the
end of a cycle.
9. Please do not close the door with excessive force. If it is found difficult
to close the door, please check if the clothes are properly inserted and
distributed.
10. Always unplug the appliance and close the water tap before cleaning and
maintenance and after each use.
11. Never pour water over the appliance for cleaning purpose. Risk of electric
shock!
12. Repairs shall only be carried out by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard. The producer will not
be responsible for damages caused by the intervention of not authorized
persons.
TRANSPORT
1. Before Transport:
– Bolts shall be reinstalled to the machine by a specialized person
– Accumulated water shall be drained out of the machine
2. This appliance is heavy. Transport with care. Never hold any protruding part
of the machine when lifting. The machine door cannot be used as a handle.
REQUIREMENTS FOR INSTALLATION, STORAGE, TRANSPORTATION (SHIPMENT), SALE
AND DISPOSAL
1. The appliance does not require any permanent installation or securing.
2. The manufacturer or consumer should store the appliance in suitable
packaging in heated facilities at a temperature of 5 °С to 40 °С and a maximum
relative humidity of 80 %. The storage facilities should not contain aggressive,
corrosion-provoking environments (acidic or alkaline vapors).
3. The following requirements should be observed to ensure proper
transportation of the appliance:
– remove all internal accessories from the appliance, if any are installed, and
pack them separately;
– ensure that the appliance is properly packed to retain its functionality and
exterior look (bulky appliances should be wrapped into plain or bubble
polyethylene film with corrugated cardboard inserts in sensitive places);
– securely fasten the appliance with straps to prevent its displacement within
the vehicle during transportation;
– transport the appliance only in an enclosed vehicle to eliminate any impact
from the outdoor environment;
– ensure that the appliance is handled with utmost care during loading and
unloading to keep the packaging undamaged.
4. The appliance requires careful handling to keep it from dust, dirt, mechanical
impact, moisture, fire, etc.
5. The appliance should be sold and purchased in compliance with the local
legislation.
6. Do not discard the appliance together with other domestic waste upon expiry
of its service life. Instead, it should be turned over for disposal to a specialized
recycling facility for electric and electronic equipment in compliance with the
federal or local legislation. By ensuring proper disposal of the appliance You
Содержание
- Русский 2
- Қазақ 14
- Հայերեն 26
- 4 2 3 5 6 9 7 8 32
- Animals and children may climb into the machine check the machine before every operation 3 do not climb or sit on the appliance 38
- Attention electric shock hazard if the supply cord is damaged it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard if the machine is damaged it must not be operated unless repaired by the manufacturer its service agent or similarly qualified persons 38
- Dear customer thank you for purchasing a centek brand product we guarantee flawless function of this item provided the guidelines of its operation are observed 38
- English 38
- Purpose of the appliance the product is intended only for home use and for textiles in household amounts suitable for machine washing this appliance is for indoor use only and not intended for built in use only use according to these instructions the appliance is not intended for commercial use any other use is considered as improper use the producer is not responsible for any damage or injuries that may result of it 38
- Remark according to eu requirements the appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved children shall not play with the appliance cleaning and user maintenance shall not be made by children without supervision children should be supervised that they do not play with the appliance children 3 years and under shall be kept away from the appliance or continuously supervised 38
- Safety precautions please read the following safety information thoroughly and follow it strictly to minimize the risk of fire or explosion electric shock and to prevent property damage personal injury or loss of life failing to follow these instructions shall void any warranty 38
- The appliance should not be used by physically sensory or mentally handicapped persons including children or by persons without sufficient experience or knowledge unless such persons are under supervision or have been instructed on the use of the appliance by the persons responsible for their safety take precautions not to let children play with the appliance 38
- This appliance is designed for use in domestic and similar applications in particular in personnel kitchen zones at stores offices and industrial facilities at agricultural farms by clients at hotels motels and other residential facilities in private boarding houses 38
- 4 2 3 5 6 9 7 8 44
- A wash end delay activation indicator b child lock activation indicator c door lock indicator d displaying numeric values e the с symbol lights up when the temperature is displayed f smart mode activation indicator 44
- Control panel 44
- On off button 2 washing program selection button 3 drying speed selector button 4 washing temperature selector button 5 display 6 smart mode activation button 7 activation button for the delayed start mode for the latter hold down the button for 3 seconds 8 custom washing time selection button 9 start pause button for wash cycle startup or suspension 10 washing program indication lights 44
- The laundry detergent should be used in accordance with the manufacturer s instructions and selected according to fabric type color degree of contamination and the washing temperature please use only detergents designed specifically for machine washing if there is too much foam reduce the amount of detergent excessive detergent produces too much foam which lowers the washing quality and overloads the motor the quantity of detergent can depend on water temperature water hardness the size and contamination degree of the items to be washed 44
- Washing program and mode description 44
- Attention in the event of a power failure the machine will continue the washing cycle from the moment it was interrupted when power supply resumes 45
- Auxiliary modes and functions wash end delay time selection this function allows to delay completion of the washing cycle for 3 to 24 hours in 1 hour increments for examples if you have selected the cotton program without the auxiliary functions the programs takes 57 minutes and set the end delay time to 10 hours then the wash will start after 9 03 hours and complete after 10 hours this is very useful if you want to complete your laundry by a definite time e g by the time you come home or wish to postpone it for the night because of more favorable nighttime electricity tariffs in order to activate this function hold down the delayed start button for 3 seconds before starting the washing program then select the desired completion delay time the display will show the relevant indicator a timer icon to reset hold down the program button 45
- Child lock function this function allows keeping the safety of your children and the appliance under control this function is activated after a program is selected and started by holding down the speed button for 3 seconds the relevant indicator will appear on the display all functions and modes of the machine will become inaccessible in order to deactivate the function repeat the same actions as for activating it the indicator will go out 45
- Delayed start the function allows delaying commencement of the washing program for up to 24 hours this is very useful when you would like to finish your laundry by a certain time e g by the time you come back home or do it in the night because of a more favorable nighttime electricity tariff rate select the desired time by pressing the delayed start button if no delay is needed select 0 45
- Drum cleaning the drum of the washing machine contacts dirty clothing and detergents bacteria and detergent residues can accumulate in the drum over time high humidity inside the machine which lasts for a long time after laundry completion contributes to the buildup of mould and putrid smell in order to extend the service life of the washing machine and keep the drum clean wipe the inside of the drum including the folds of the rubber seal dry after each laundry and regularly use the drum cleaning function 1 before activating the drum cleaning function ensure that there is nothing left in the drum 2 add a special drum cleaning detergent for automatic washing machines into the main wash detergent compartment 3 select the program and press the start pause button the cleaning is performed at 85 с 4 wait for the program to complete and wipe the inside of the drum with a soft dry cloth 45
- Note if you set the start delay do not use liquid detergent as it is prone to hardening and can stick to the internal parts of the machine if it is not immediately dissolved in water 45
- Note in order to achieve optimal washing results follow the instructions related to the maximum weight of the clothes loaded into the machine to save electric power choose longer washing programs with lower water temperatures washing program duration may vary depending on the actual weight and properties of the laundry system water temperature and hardness and other parameters 45
- Note the wash end delay function is not available for some programs 45
- Silent mode for disabling the audio signals simultaneously hold down the speed and smart buttons for 3 seconds all signal and alarm sounds will be disabled re activate the sounds in the same way 45
- Summary table of washing program parameters 45
- Washing temperature selection by repeatedly pressing the temperature button you can select one of the available temperature if this is provided by the program 45
- Cleaning the washing agent tray and its compartments 47
- Cleaning the water intake filter 47
- Close the valve and disconnect the tube from it 2 disconnect the water supply tube from the washing machine pull out the filter with long pliers 3 clean the water intake filter 4 refit the filter and reconnect the water supply tube 5 clean the filter every 3 month to ensure proper operation of the washing machine 47
- Note clean the valve filter first then the filter in the washing machine 47
- Note do not use alcohol solvents and chemicals for cleaning it is recommended to clean the washing agent tray every 3 months 47
- Press the latch located above the rinser conditioner compartment and remove the tray 2 rinse the tray with water 3 clean the inside of the compartment with an old toothbrush or something similar 4 reinstall the tray and return it to its original position 47
- Troubleshooting 47
- Certification data guarantee the service life of this item is 10 years since the date of sale to the end user provided the item will be used in strict accordance with the present manual and the applicable technical standards upon expiry of the service life please contact the nearest authorized service centre for suggestions as to further operation of the appliance the manufacturing date of the appliance is integrated into the serial number digits 2 and 3 year digits 4 and 5 month of manufacture if any questions related to appliance maintenance should arise or if the appliance has malfunctions apply to the centek tm authorized service center the address of the service center can be found on the website https centek ru servis service support contacts phone 7 988 24 00 178 vk vk com centek_krd general service center ooo larina servis krasnodar phone 7 861 991 05 42 the product has the certificate of conformity no еаэс ru с cn нв62 в 0884 22 of 27 2 022 48
- Dear valued consumer the guarantee period for all appliances amounts to 36 months since the date of sale to the end consumer with this warranty card the manufacturer confirms the proper condition of the appliance and undertakes to repair free of charge all defects caused by the manufacturer s default 48
- Disposal upon expiry of its service life the appliance can be disposed of separately from ordinary domestic waste you can turn it over to a specialized electric and electronic appliance disposal and recycling centre 48
- Error indication in some cases malfunctions can be detected by the washing machine s microcomputer control system warnings are issued as audio signals and error codes displayed 48
- Guarantee maintenance terms 48
- Manufacturer and importer information imported to eaeu by ooo larina elektroniks address russia 350080 krasnodar ul demusa 14 phone 7 861 2 600 900 48
- Note always verify the cause of the malfunction and rectify it before resuming machine operation press start pause once again if the error code disappears the machine will continue working if the error code is till displayed please disconnect the machine from power supply and contact a service center without delay the contents of garment pockets may block the drain hose or cause damage to the machine do not wash clothes that do not have care instruction tags as well as garments not meant for machine washing 48
- Specificaions 48
- The guarantee shall be valid if the following documentation conditions are observed the original warranty card shall be filled out correctly and clearly indicating the of appliance model serial number and sale date the stamp of the seller company and signature of its representative shall be available as well as the stamps on each coupon and the buyer s signature in the warranty card the manufacturer reserves the right to reject guarantee maintenance if the buyer fails to provide the abovementioned documents or if the information contained therein is incomplete illegible or ambiguous 2 the guarantee shall be valid if the following operation conditions are observed the appliance is used in strict accordance with the present manual the safety rules and requirements are observed 3 the guarantee does not apply to regular maintenance cleaning installation and setup of the appliance at the owner s location 48
Похожие устройства
- Centek CT-1958 Инструкция по эксплуатации
- Centek CT-1959 Инструкция по эксплуатации
- Centek CT-1960 Инструкция по эксплуатации
- Centek CT-1961 Инструкция по эксплуатации
- Centek CT-1962 Инструкция по эксплуатации
- Centek CT-1965 Инструкция по эксплуатации
- Centek CT-8585 Smart Инструкция по эксплуатации
- Centek CT-8640 Инструкция по эксплуатации
- Centek CT-1550 Black Инструкция по эксплуатации
- Centek CT-1550 White Инструкция по эксплуатации
- Centek CT-1563 Black Инструкция по эксплуатации
- Centek CT-1563 White Инструкция по эксплуатации
- Centek CT-1564 Black Инструкция по эксплуатации
- Centek CT-1624 Инструкция по эксплуатации
- Centek CT-1625 Инструкция по эксплуатации
- Centek CT-1626 Инструкция по эксплуатации
- Centek CT-5108 Инструкция по эксплуатации
- Centek CT-5110 Инструкция по эксплуатации
- DELVENTO VGB4601 Схема
- DELVENTO VGB4601 Руководство пользователя