Centek CT-1626 [10/24] Attention this appliance is equipped with a thermostat which

Centek CT-1626 [10/24] Attention this appliance is equipped with a thermostat which
10
ATTENTION! This appliance is equipped with a thermostat which
automatically turn the appliance off in case of overheating.
If the appliance suddenly stops operating:
- Pull the plug from the electric socket.
- Turn the appliance off by pressing the ON/OFF button.
- Let the appliance cool down for 1 hour.
- Connect the power cable to the electric socket.
- Turn the appliance on again.
If the thermostat trips too often, apply to the Vendor or an authorized
service centre.
2. APPLIANCE DESCRIPTION
1. Loading tray
2. Lock button
3. «ВКЛ/ВЫКЛ» (ON/OFF) and «РЕВЕРС» (REVERSE) button
4. Sausage nozzle
5. Kebbe nozzle
6. Head nozzle
7. Motor unit
8. Pusher
9. Knife
10. Cap nut
11. Auger
12. Disk 5mm
13. Disk 7mm
14. Shredder Pusher
15. Shredder housing
16. Slicer attachment
17. Large grater
18. Fine grater
19. Juicer
3. SCOPE OF SUPPLY
- Electric meat grinder – 1 pc.
- Grinder head – 1 pc.
- Auger – 1 pc.
- Pusher – 1 pc.
- Blade – 1 pc.
- Grinder plate – 2 pcs.
- Ring nut – 1 pc.
- Hopper – 1 pc.
- Sausage attachment – 1 pc.
- Kibbeh attachment – 1 pc. (2 parts)
- Operating Manual – 1 pc.
- Shredder pusher - 1 pc.
- Shredder housing - 1 pc.
- Chopper nozzle - 3 pcs.
- Juicer, complete – 1 pc.
4. OPERATING PROCEDURE
PREPARATION
-
Ensure that the appliance is turned off before connecting it to power
supply.
-
Before grinding meat ensure that all bones and excessive fat has been
removed.
-
Do not attempt to grind hard or fibrous foods (like ginger or horseradish).
-
If a hard piece of food causes the auger to stop, immediately turn the
unit off and use the reverse function.
ASSEMBLY
-
Press the latch button, take the grinder head by the intake tube and align
it with the motor coupling on the grinder body, taking care that the intake
tube is slanted in the direction of the arrow on the top of the grinder
body, then rotate the head counterclockwise until it is securely locked.
-
Insert the auger into the head, long axle first, and rotate it slightly until
it engages with the motor shaft.
-
Put the blade on the auger axle with the cutting edges facing you. If the
blade is not install correctly the meat will not be cut.
-
Install the desired grinder plate in front of the blade, aligning it with the
lugs on the grinder head.
-
Holding the plate from falling off with one hand, set and tighten the ring
nut with the other hand. Avoid overtightening the nut.
-
Install the hopper on the grinder head and seat it firmly in the operating
position.
- Place the appliance on a stable surface.
-
Do not obstruct the free flow of air at the bottom and sides of the motor
unit. Avoid blocking the ventilation holes on the bottom and side of the
motor unit.
SLICER
Press the lock button, take the chopper housing by the receiving tube
and connect it to the connector, make sure that the tube is tilted in the
direction of the arrow on the top of the housing, then turn the housing
counterclockwise until it is securely fixed.

Содержание

Похожие устройства

Скачать
Случайные обсуждения

Ответы 0

как собрать овощерезку
5 месяцев назад