Kuppersberg NRS 186 BE [34/64] Tips for saving energy

Kuppersberg NRS 186 BE [34/64] Tips for saving energy
34
TECHNICAL PASSPORT ENGLISH
Larder
Bubbling noise and splash: This noise is
caused by the ow of the refrigerant in the
tubes of the system.
Water ow noise: Normal ow noise of
water owing to the evaporation container
during defrosting. This noise can be heard
during defrosting.
Air Blow Noise: ormal fan noise. This
noise can be heard in fridges during
normal operation of the system due to the
circulation of air.
If the edges of fridge cabinet that the
door joint contact are warm;
Especially in summer (hot weather),
the surfaces that the joint contact may
get warmer during the operation of the
compressor, this is normal.
If humidity builds up inside the fridge;
 Are all food packed properly? Are the
containers dried before placing them in the
fridge?
 Is the fridge’s door opened
frequently? Humidity of the room gets in the
fridge when the door is opened. Humidity
build up will be faster when you open the
door more frequently, especially if the
humidity of the room is high.
If the door is not opened and closed
properly;
 Do the food packages prevent
closing of the door?
 Are the door compartments, shelves
and drawers placed properly?
 Are door joints broken or torn?
 Is your fridge on a level surface?
IMPORTANT NOTES:
 Compressor protection function will
be activated after sudden power breakdowns
or after unplugging the appliance, because
the gas in the cooling system is not
stabilized yet. Your appliance will start after
5 minutes, there is nothing to worry about.
 If you will not use your fridge for a
long time (e.g. in summer holidays) unplug
it. Clean your fridge according to chapter
CLEANING AND MAINTENANCE” and leave
the door open to prevent humidity and smell.
 To stop the appliance completely,
unplug from main socket (for cleaning and
when the door is left open)
 If the problem persists after you have
followed all the instructions above, please
consult to the nearest Authorized service.
 The lifetime of your appliance stated
and declared by the Department of the
Industry is 10 years (the period for retaining
parts required for the proper functioning of
the appliance).
Tips for saving energy
1.Install the appliance in a cool, well
ventilated room , but not in direct sunlight
and not near heat source (radiator, cooker..
etc). Otherwise use an insulating plate.
2.Allow ward food and drinks to cool
down outside the appliance.
3.When placing, drinks and slops they
must be covered. Otherwise humidity
increases at the appliance. Therefore the
working time gets longer. Also covering
drinks and slops helps to save smell and
taste.
4.When placing food and drinks, open
the appliance door as briey as possible.
5.Keep close the covers of any different
temperature compartment in the appliance
(crisper, chiller ...etc ).
6.Door gasket must be clean and pliable.
Replace gaskets if worn.

Содержание

Скачать