Ada Cube 360 Green Professional Edition А00535 [4/36] Before use remove battery compartment cover insert three batteries

4 English

LASER LINES

FEATURES

1. Vertical laser beam (V) / Horizontal laser beam (H)

2. Detector mode

3. Battery compartment

4. Tripod mount 1/4’’

5. Compensator switch (ON/X/OFF)

6. Vertical laser window

7. Horizontal laser window

SAFETY INSTRUCTIONS

Follow safety requirements! Don’t face and stare at laser beam!

Line laser is an accurate Instrument, which should be stored and used

with care. Avoid shaking and vibrations! Store the Instrument and It’s

accessoriesnly In the carrying case.

In case of high humidity and low temperature, dry out the line laser and

clean It after the usage. Do not store the line laser at a temperature be-

low -20°C and above 50°C, otherwise the line laser can be out of action.

Don’t put the line laser Into the carrying case If the line laser or case are

wet. To avoid moisture condensation Inside the Instrument- dry out the

case and laser line laser ! Check regularly Instrument line laser ! Keep the

lens clean and dry. To clean the line laser use a soft cotton napkin!

OPERATION

1. Before use, remove battery compartment cover. Insert three batteries

into battery compartment with proper polarity, then put the cover back.

2. Set the compensator locking grip (5) into ON position. If the switch is ON,that

means the power is on and the compensator is working. If the switch (5) is

in intermediate position, that means the power is opened,the compensation

is still locked, but it will not warn if you issue the slope. It’s the hand-mode.