Oleo-Mac 2,8 л.с. bch 50t, леска + диск, 8,3 кг 6151-9050E1 Инструкция к бензиновой косе Oleo-Mac BCH 50T онлайн [33/204] 833354

• Clean machine perfectly and grease metal parts.

• Remove the blade, clean and oil it to prevent rust.

• Remove the blade retainer flanges; clean, dry and oil the bevel gear housing.

• Remove the fuel from the tank and replace the cap.

• Thoroughly clean the cooling slots and air filter.

• Store the machine in a dry place, preferably not in direct contact with the ground and away

from heat sources.

• If the machine is stored with the metal blade mounted, it is mandatory to mount the blade

guard as well.

• Store the machine out of the reach of children.

• The procedures for returning the machine to service following winter storage are the same

as for starting up during everyday use (see chapter 8 Starting).

13 ENVIRONMENTAL PROTECTION

Environmental protection should be a priority of considerable importance when using the

machine, for the benefit of both social cohesion and the environment in which we live.

• Try not to cause any disturbance to the surrounding area.

• Strictly comply with local regulations for the disposal of waste material after cutting.

• Scrupulously comply with local regulations and provisions for the disposal of packaging, oils,

petrol, gasoline, batteries, filters, deteriorated parts or any elements which have a strong

impact on the environment. This waste must not be disposed of as normal waste, it must be

separated and taken to specified waste disposal centers where the material will be recycled.

13.1 DEMOLITION AND DISPOSAL

When the machine reaches the end of its service life, do not dispose of it into the environment;

instead take it to a waste disposal center.

Most materials used in the manufacture of the machine are recyclable; all metals (steel,

aluminum, brass) can be delivered to a normal recycling station. For information, contact your

local waste recycling service. Waste disposal must be carried out with respect for the

environment, avoiding soil, air and water pollution.

In all cases, applicable local legislation must be complied with.

When the machine is scrapped the CE mark label must also be destroyed together with this

manual.