Fubag OL 231/50 CM 2 [5/15] Operator s manual

Содержание

• Cover 1 1
• Operator s manual 2
• Page01 2
• Page02 3
• Page03 4
• Operator s manual 5
• Page04 5
• Safety operation 5
• Caution 6
• Not to do 6
• Operator s manual 6
• Page05 6
• Operator s manual 7
• Page06 7
• Start up and use 7
• Technical specifications 7
• Air pressure can be regulated in order to optimize use of air powered tools operating on the knob 8
• Be used are compatible with the pressure set on the pressure regulator and with the amount of air supplied by the compressor 8
• Maintenance 8
• Operator s manual 8
• Page07 8
• Please check that the air consumption and the maximum working pressure of the pneumatic tool to 8
• Switch of the pressure switchis modified to use the compressor again wait at least 10 seconds after this has been switched off before restarting 8
• The compressor continues to operate automatically with this work cycle until the position of the 8
• The service life of the machine depends on maintenance quality before carrying out any operation always pull out the plug and drain the receiver completely fig 11 periodically or after working with the compressor for more than an hour drain the condensate that forms inside the receiver fig 11 due to the humidity in the air this protects the receiver from corrosion and does not restrict its capacity 8
• When you have finished working stop the machine pull out the plug and empty the reservoir fig 8
• With the valve open pulling it up and turning it in a clockwise direction to increase pressure and counterclockwise to reduce this fig 5 6 7 8 once you have set the value required push the knob down to lock it 8
• Operator s manual 9
• Page08 9
• Rub a g 9
• Troubleshooting 9
• Warranty 9
• Warranty refer to defects of materials and components and do not refer to components subject to natural wear and maintenance work only machines cleaned from dust and dirt in original factory packing fully completed provided with instruction manual warranty card with fixed sales date with a shop stamp factory serial number and originals of sales and ware receipt issued by salesman are subjects of warranty within the warranty period the service center eliminate free of charge all detected production defects the manufacturer disclaims warranty and legal responsibilities if nonobservance of the instruction manual by user unqualified disassembling repair or maintenance of the machine as well does not bear responsibility for caused injury to persons or damages 9
• Page09 10
• Инструкция по эксплуатации 10
• Правила безопасности 10
• Page10 11
• Важно 11
• Гиьад 11
• Запрещается 11
• Инструкция по эксплуатации 11
• Page11 12
• Инструкция по эксплуатации 12
• Ипад 12
• Пуск и эксплуатация 12
• Технические характеристики 12
• Page12 13
• Инструкция по эксплуатации 13
• Техническое обслуживание 13
• Page13 14
• Гарантийные обязательства 14
• Инструкция по эксплуатации 14
• Неисправности и способы их устранения 14
• Шрад 14
• Cover 2 15

Похожие устройства

• Patriot WO 100-440 525301935 Инструкция к товару
• Patriot WO 180K 525301905 Инструкция
• P.I.T. СТАНДАРТ GCS-52-D Инструкция к P.I.T. СТАНДАРТ GCS-45-D
• Patriot WO 50-300 525301925 Инструкция по эксплуатации
• ПКБ АРМА БП-ТВ3500-2 А522-3501 Инструкция по эксплуатации
• ABAC B6000 500T 62UW805KQA073 (4116020400) Инструкция по эксплуатации
• Fini AMICO 25/2400 100540241 Инструкция
• Fini MK-103-150-3M 100049765 Инструкция по эксплуатации
• Кедр КП-360/100 PRO 8023708 Руководство по эксплуатации КЕДР КП-360-100 PRO
• Кедр КП-480/100 PRO 8023709 Руководство по эксплуатации КЕДР КП-360-100 PRO
• Osram 100PSI 30 л/мин, 10 А, 12 В OTI200 Инструкция к товару
• Rossvik 1400л/мин, 10бар, ресивер 500л, 380В/7,5кВт СБ4/Ф-500.LТ100 Деталировка
• Rossvik 1400л/мин, 10бар, ресивер 500л, 380В/7,5кВт СБ4/Ф-500.LТ100 Инструкция
• Сорокин ресивер 100 л 13.6 Технический паспорт
• RedVerg Basic GC-45C 6672714 Инструкция к REDVERG Basic GC-45C 6672714
• POWER TECHNIC с фильтром влагоотделителем ACL200/008 Гарантийный талон
• Aurora AIR-25 6763 Инструкция по эксплуатации
• Aurora WIND-25 6762 Инструкция по эксплуатации
• ELSEN 1/2", В EPR01.1212 Инструкция к ELSEN EPR01.1212
• Patriot PTR 100-440I 525301965 Инструкция по эксплуатации

Fubag Operator s manual www fubag ru WARNING BEFORE USING THE COMPRESSOR READ THE INSTRUCTION I MANUAL CAREFULLY FOR QUALIFIED AND SPECIALLY TRAINED PERSONS ONLY AFTER PROPER READING OF THIS MANUAL IS ALLOWED TO USE AND TO MAINTAIN THIS COMPRESSOR The detailed description safety rules and all required information necessary for proper operation and maintenance of FUBAG compressor are provided below Keep this instruction manual by machine and refer to it by any doubts concerning safety operation maintenance storage and handling of FUBAG compressor 1 Safety operation The compressor must be used in a suitable environment well ventilated with an ambient temperature of between 5 C and 40 C and never in places affected by dust acids vapors explosive orflammable gases Always maintain a safety distance of at least 3 meters between the compressor and the work area Any coloring of the guards of the compressor during painting operations indicates that the distance is too short Insert the plug of the electric cable in a socket of suitable shape voltage and frequency complying with current regulations Use extension cables with a maximum length of 5 meters and of suitable cross section The use of extension cables of different length and also of adapters and multiple sockets should be avoided Always use the switch of the pressure switch to switch off the compressor or use the switch of the electric panel for models equipped with this Never switch off the compressor by pulling out the plug in orderto avoid restart with pressure in the head Always use the handle to move the compressor When operating the compressor must be placed on a stable horizontal surface to guarantee correct lubrication Position the compressor at least 50 cm from the wall to permit optimal circulation of fresh air and to guarantee correct cooling A The acoustic pressure s value measured at 4 m in free field corresponds to the acoustic power s value stated on the yellow label located on the compressor minus 20 dB 4