Fubag OL 231/50 CM 2 [6/15] Caution

Содержание

• Cover 1 1
• Operator s manual 2
• Page01 2
• Page02 3
• Page03 4
• Operator s manual 5
• Page04 5
• Safety operation 5
• Caution 6
• Not to do 6
• Operator s manual 6
• Page05 6
• Operator s manual 7
• Page06 7
• Start up and use 7
• Technical specifications 7
• Air pressure can be regulated in order to optimize use of air powered tools operating on the knob 8
• Be used are compatible with the pressure set on the pressure regulator and with the amount of air supplied by the compressor 8
• Maintenance 8
• Operator s manual 8
• Page07 8
• Please check that the air consumption and the maximum working pressure of the pneumatic tool to 8
• Switch of the pressure switchis modified to use the compressor again wait at least 10 seconds after this has been switched off before restarting 8
• The compressor continues to operate automatically with this work cycle until the position of the 8
• The service life of the machine depends on maintenance quality before carrying out any operation always pull out the plug and drain the receiver completely fig 11 periodically or after working with the compressor for more than an hour drain the condensate that forms inside the receiver fig 11 due to the humidity in the air this protects the receiver from corrosion and does not restrict its capacity 8
• When you have finished working stop the machine pull out the plug and empty the reservoir fig 8
• With the valve open pulling it up and turning it in a clockwise direction to increase pressure and counterclockwise to reduce this fig 5 6 7 8 once you have set the value required push the knob down to lock it 8
• Operator s manual 9
• Page08 9
• Rub a g 9
• Troubleshooting 9
• Warranty 9
• Warranty refer to defects of materials and components and do not refer to components subject to natural wear and maintenance work only machines cleaned from dust and dirt in original factory packing fully completed provided with instruction manual warranty card with fixed sales date with a shop stamp factory serial number and originals of sales and ware receipt issued by salesman are subjects of warranty within the warranty period the service center eliminate free of charge all detected production defects the manufacturer disclaims warranty and legal responsibilities if nonobservance of the instruction manual by user unqualified disassembling repair or maintenance of the machine as well does not bear responsibility for caused injury to persons or damages 9
• Page09 10
• Инструкция по эксплуатации 10
• Правила безопасности 10
• Page10 11
• Важно 11
• Гиьад 11
• Запрещается 11
• Инструкция по эксплуатации 11
• Page11 12
• Инструкция по эксплуатации 12
• Ипад 12
• Пуск и эксплуатация 12
• Технические характеристики 12
• Page12 13
• Инструкция по эксплуатации 13
• Техническое обслуживание 13
• Page13 14
• Гарантийные обязательства 14
• Инструкция по эксплуатации 14
• Неисправности и способы их устранения 14
• Шрад 14
• Cover 2 15

Похожие устройства

• Patriot WO 100-440 525301935 Инструкция к товару
• Patriot WO 180K 525301905 Инструкция
• P.I.T. СТАНДАРТ GCS-52-D Инструкция к P.I.T. СТАНДАРТ GCS-45-D
• Patriot WO 50-300 525301925 Инструкция по эксплуатации
• ПКБ АРМА БП-ТВ3500-2 А522-3501 Инструкция по эксплуатации
• ABAC B6000 500T 62UW805KQA073 (4116020400) Инструкция по эксплуатации
• Fini AMICO 25/2400 100540241 Инструкция
• Fini MK-103-150-3M 100049765 Инструкция по эксплуатации
• Кедр КП-360/100 PRO 8023708 Руководство по эксплуатации КЕДР КП-360-100 PRO
• Кедр КП-480/100 PRO 8023709 Руководство по эксплуатации КЕДР КП-360-100 PRO
• Osram 100PSI 30 л/мин, 10 А, 12 В OTI200 Инструкция к товару
• Rossvik 1400л/мин, 10бар, ресивер 500л, 380В/7,5кВт СБ4/Ф-500.LТ100 Деталировка
• Rossvik 1400л/мин, 10бар, ресивер 500л, 380В/7,5кВт СБ4/Ф-500.LТ100 Инструкция
• Сорокин ресивер 100 л 13.6 Технический паспорт
• RedVerg Basic GC-45C 6672714 Инструкция к REDVERG Basic GC-45C 6672714
• POWER TECHNIC с фильтром влагоотделителем ACL200/008 Гарантийный талон
• Aurora AIR-25 6763 Инструкция по эксплуатации
• Aurora WIND-25 6762 Инструкция по эксплуатации
• ELSEN 1/2", В EPR01.1212 Инструкция к ELSEN EPR01.1212
• Patriot PTR 100-440I 525301965 Инструкция по эксплуатации

fubag Operator s manual www fubag ru Not to do Never direct the jet of air towards persons animals or your body Always wear safety goggles to protect your eyes from flying objects that may be lifted by the jet Never direct the jet of liquids sprayed by tools connected to the compressor towards the compressor Never use the appliance in your bare feet or with wet hands or feet Never pull the power cable to pull the plug out of the socket or to move the compressor Never leave the appliance exposed to adverse weather conditions rain sun fog snow Never transport the compressor with the reservoir pressurized Never weld or machine the reservoir In the case of faults or corrosion replace it completely Never allow inexpert persons to use the compressor Keep children and animals away from the work area Never position flammable or nylon or fabric articles close to and or on the compressor Never clean the compressor with flammable liquids or solvents Clean with a damp cloth only after making sure that you have unplugged the compressor The compressor is designed only to compress air and must not be used for any other type of gas The compressed air produced by the compressor cannot not be used for pharmaceutical food or hospital purposes except after particular treatments It is not suitable for filling the air bottles of scuba divers Caution To avoid overheating of the electric motor this compressor is designed for intermittent operation as indicated on the dataplate forexample S3 25 means 2 5 minutes ON and 7 5 minutes OFF In the case ofoverheating the thermal cutout of the motor trips automatically cutting off the power when the temperature is too high due to excess current takeoff To facilitate machine restart it is important not only to carry out the operations indicated but also to set the button of the pressure switch returning this to the OFF position and then ON again fig 1 2 3 Are fitted with a pressure switch equipped with a delayed closing air vent valve or with a valve located on the check valve that facilitates motor start up therefore a few second jet of airfrom this with the reservoir empty is to be considered normal To guarantee machine safety all the compressors are fitted with a safety valve that is activated in the case of failure of the pressure switch When connecting an air powered tool to a hose of compressed air supplied by the compressor interruption of the flow of airfrom the hose is compulsory Use of the compressed air for the various purposes envisaged inflation air powered tools painting washing with water based detergents only etc requires knowledge of and compliance with the rules established for each individual use 5