Condtrol XLiner Combo [18/23] Xliner xliner combo condtrol xliner xliner combo condtrol

XLiner / XLiner Combo CONDTROL

user manual user manual

EN EN

Turn the instrument by 180°, allow it to level in and mark the cross point of the

laser lines on the opposite wall B (point II).

Without turning the instrument, position it close to wall B. Switch the instrument

on and allow it to level in.

Align the height of the instrument (using a tripod or by underlaying, if

required) in such a manner that the cross point of the laser lines is projected

against the previously marked point II on the wall B.

Without changing the height, turn around the instrument by 180°. Direct it

against the wall A such a manner that the vertical laser line runs through the

already marked point I. Allow the instrument to level in and mark the cross

point of the laser lines on the wall A (point III).