Home
Главная
Condtrol
Нивелир
XLiner Combo
Инструкция по эксплуатации Страница: 20

Condtrol XLiner Combo [20/23] Xliner xliner combo condtrol xliner xliner combo condtrol

XLiner / XLiner Combo CONDTROL

user manual user manual

EN EN

When the maximum deviation exceeds 0.8 mm, you should contact

CONDTROL service centre.

Attention!

Always use only the middle of the laser line for marks. The width of the laser

line changes with distance. The instrument automatically switches off in 60

minutes of continuous work. If it is necessary, switch on the instrument and

continue working.

Orthogonal directions construction ( XLiner Combo only)

Check the 90° including angle of cross dot and the front, left, right dots.

Installing the instrument on the tripod, and put them in the centre of 6m x 6m

room, then switch on all the laser beams and dots.

Face the cross dot and front, left, right dots to the walls, the down dot aims

the floor, mark A, B, C, D, E respectively.

Rotate the instrument 90° around the down dot, mark A1, B1, C1, D1 on the

walls, measure respectively the distances of A to C1, B to D1, C to B1 and

D to A1.

If the value is larger than 2 mm, the instrument must be returned to

CONDTROL service centre.

USING WITH ACCESSORIES*

*supplied in addition

Working with the detector

To work with the detector press the button 2 located on the keypad, the

instrument is switched to the pulsed mode. The indicator 4 lights up.

The laser radiation detector

increases a working range up

to 100 meters. The detector is

intended for working in the streets

or in light conditions. The detector

is supposed to be used at a distance

not less than 3 meters from the

instrument. The detector can be

fixed to the station rod by means of

the multifunction base.

ATTENTION! The detector defines

a modulated signal from XLiner

Combo and does not define permanent laser radiation or a point. Keep clean

the sensitive field of the receiver, wipe it with a soft cloth, and do not use

reactive liquids (spirit, solvents, etc).

To switch on the detector press button «ON/OFF».

By pressing the button «SOUND» you can switch on or switch off the sound

signal of the search of the radiation axis.

The corresponding symbol appears on the indicator field of the detector.

The search of the laser radiation axis is carried out by smooth moving of the

detector on a vertical. At the moment when the laser is found in the sensitive

field of the receiver, there is an arrow on the screen, directed upwards or

downwards, corresponding to a direction in which it is necessary to move

the detector to find a centre. The sound signal is heard. At the moment

when the laser emitter axis corresponds to the centre of the sensitive

button «SOUND»

button «ON/OFF»

≤

Condtrol XLiner Combo [20/23] Xliner xliner combo condtrol xliner xliner combo condtrol

Содержание

Похожие устройства