Hitachi C 10 RE [18/45] Maintenance

– 18 –

English

MAINTAINING YOUR TABLE SAW

MAINTENANCE

EC-Declaration of Conformity

WARNING

To avoid injury from accidental starting, always turn the switch off (“0”) and remove the power plug from the

power source before changing the blades.

GENERAL MAINTENANCE

Occasionally use a cloth to wipe off chips and dust from the machine. And oil the rotary parts once a month to extend

the tool life. Do not oil the motor.

BRUSH INSPECTION

Check the motor brushes after the ﬁrst 50 hours of use for a new machine or after a new set of brushes have been

installed. After the ﬁrst check, examine them every 10 hours of use.

When the carbon is worn to 6 mm in length or if the spring or shunt wire is burned or damaged, replace both brushes. If

the brushes are found serviceable after removing, reinstall them.

Rexon Industrial Corp., Ltd. declares this Table Saw,

Model C10RE, is in conformity with the Low Voltage

Directive 73/23/EEC and the Amendment Directive

93/68/EEC and the Machinery Directive Annex 1

of 98/37/EC and EMC Directive 89/336/EEC. The

conformity is certiﬁed by TÜV Rheinland Product Safety

GmbH, Am Grauen Stein, D-51105 Köln, Germany.

George Ku, Marketing manager

Date: 24, August, 2006

Rexon Industrial Corp., Ltd.,

261 Jen Hwa Road,

Tali, Taichung 412

Taiwan, R.O.C.