Brayer 6 л, 25 м, 40-80 процентов, 24 ч. BR4702 [4/23] 7 en en
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer 6 л, 25 м, 40-80 процентов, 24 ч. BR4702 [4/23] 7 en en

Brayer 6 л, 25 м, 40-80 процентов, 24 ч. BR4702 [4/23] 7 en en
6 7en en
BEFORE THE FIRST USE
After the unit’s transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using it.
• Use the humidier at the room temperature from
+10° С to +40°С and
• relative humidity less than 80%.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Check the delivery set.
• Read the safety measures and operating
recommendations.
• Examine the unit for damages; if the unit is damaged,
do not plug it into the mains.
• Make sure that the indicated specications of the
power supply voltage of the unit correspond to the
specications of your mains.
USING THE ULTRASONIC HUMIDIFIER
• Remove the nozzle (1) and the decorative lid (2),
remove the water tank (3) from the unit body (12)
(pic. 1).
• Turn over the water tank (3), turn the lid (6)
counterclockwise and remove it (Pic. 2).
• Fill the water tank (3) with the required amount of
water.
• Notes: — if the tap water used is hard, use water
cleaned with household lters or mix tap water with
distilled water in proportion 1:1.
• Install the lid (6) on the water inlet (5) and thread it
turning clockwise.
• Install the tank (3) lled with water on the unit body
(12), install the decorative lid (2) and the nozzle (1).
• Wait till the process chamber (13) is lled with water.
• If you want to use the aromatization function, remove
the container (11). Add some drops of water-soluble
aromatic oil and install the container (11) back to its
place (Pic. 3).
• Notes:
- use water-soluble aromatic oils only
- if you are not going to use the aromatization
function, remove the container (11), wash it with
water, dry and install back to its place
• Insert the power plug into the socket.
• Switch the Ultrasonic humidier on by turning the
knob (9) clockwise, the indicator will light up green.
• Set the mist release intensity by turning the knob (9).
• To turn the illumination on press the button (7), to
switch the illumination off press the button (7) again.
• If the water tank (3) is empty, the indicator will light
up red.
• Switch the Ultrasonic humidier off by turning the
knob (9) counterclockwise and unplug the unit.
• Fill the tank (3) with water, install it to its place and
switch the unit on.
• After the unit operation, switch the Ultrasonic
humidier off by turning the knob (9)
counterclockwise and unplug the unit.
CLEANING AND MAINTENANCE
• Hard water causes the appearance of mineral scale
inside the process chamber (13), on the sprayer and
in the water tank (3); mineral scale leads to improper
operation of the humidier.
• It is recommended to clean the process chamber (13)
and the sprayer weekly, and to change water in the
water tank (3).
• If you are not going to use the Ultrasonic humidier
for a long
• time:
- pour the water out of the water tank (3) and the
process chamber (13)
- wash and clean the process chamber (13) and the
sprayer
- wash the water tank (3)
- dry the unit thoroughly and take it away for
storage.
WARNING!
Always switch the Ultrasonic humidier off and unplug
it before maintenance works or cleaning.
WEEKLY CARE
• Once a week wash the water tank (3), the process
chamber (13) and the sprayer with warm water and
neutral detergent and rinse thoroughly with water.
• Add some detergent drops on the sprayer and wait
for several minutes. Remove the deposits from the
sprayer surface with a brush.
• Notes: — you can use scale removal substances for
electric kettles as a cleaning agent for the process
chamber (13) and the sprayer strictly following the
instruction.
• Remove the grid (10), clean the lter from dust,
install the lter and the grid (10) back to their place.
• Clean the unit body (12) with a slightly damp cloth
and then wipe the body (12) dry.
• Do not immerse the unit body (12), the power cord
and the power plug into water or other liquids.
Provide that no liquid gets inside the unit body (12).
• Do not use solvents or abrasives to clean the surface
of the body (12) and the water tank (3).
STORAGE
• Clean the Ultrasonic humidier before taking it away
for storage, make sure that the Ultrasonic humidier
parts are dry, pack the Ultrasonic humidier in the
original package.
• Do not store the unit with remaining water in the tank
(3) and the process chamber (13).

Содержание

Похожие устройства

Скачать