Oregon BL300 609459 [25/464] Troubleshooting

Oregon BL300 609459 без акк. и з.у [25/464] Troubleshooting
25
TROUBLESHOOTING
OREGON® Cordless Tool System
BLOWER MODEL BL300
AA 1214 - F/N 571703
TROUBLESHOOTING
Use this table to see possible solutions for problems with the blower. If these
suggestions do not solve the problem, see “Warranty and Service”.
SYMPTOM POSSIBLE CAUSE RECOMMENDED ACTIONS
Motor does
not run or runs
intermittently
Battery discharged Recharge. See “Battery Pack and Charger”.
Trigger lock-out not
pressed
Press the trigger lock-out before squeezing the
trigger switch. See “General Operation.
Battery pack not fully
inserted
Press the battery pack into the battery port until it
clicks into place.
Battery contacts dirty
Remove the battery pack, remove debris from the
battery port and then clean the contacts with a
clean, dry cloth.
Battery pack too hot or
too cold
Allow the battery pack to warm or cool to within
the operating temperature range of 0°C to 40°C
(32°F to 104°F).
Electronics cooling vent
clogged
Clear any debris from the vent to provide
unobstructed airflow to the variable trigger.
Air volume and/
or speed from
nozzle decreases
noticeably
Air intake clogged Clear debris from the intake screen.
Nozzle clogged
Remove the battery, then remove the nozzle and
clear debris from the nozzle.
Excessive vibration Blower fan damaged
Have the blower inspected at an approved service
location.
Turbo button not
operating
Use of a B500S 1.25Ah
battery pack
The turbo button will not operate with a B500S
1.25Ah battery. Insert higher capacity battery pack
to operate turbo button.
Battery pack does
not charge
Battery pack over/
under temperature
protection is activated
This may occur when the blower is run
continuously or exposed to high ambient
temperatures. Allow the battery pack to reach
the acceptable temperature before charging. See
“Battery Pack and Charger”.
Dirty or damaged
contacts on battery
pack or charger
Inspect the contacts on both the battery pack
and charger. If necessary, clean according to the
instructions in this manual. Reinsert battery pack
into the charger, making sure it is fully seated.
Battery pack is at the
end of its life
All batteries have a finite life. If the battery pack
is more than two years old or has been recharged
frequently, it may be time to replace it. Replace
only with the battery pack specified for this blower.
Charger faulty
Have the function checked at an approved service
location.

Содержание

Похожие устройства

Скачать