Makita LXT BL 18 В DUX18Z [12/116] Functional description

Makita LXT BL 18 В DUX18Z [12/116] Functional description
12 ENGLISH
Tips for maintaining maximum
battery life
1.
Charge the battery cartridge before completely dis-
charged. Always stop tool operation and charge the
battery cartridge when you notice less tool power.
2. Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3. Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
4. When not using the battery cartridge, remove
it from the tool or the charger.
5. Charge the battery cartridge if you do not use
it for a long period (more than six months).
PARTS DESCRIPTION
►Fig.4
1 Batterycartridge 2 Lock-o󰀨lever 3 Switch trigger 4 Hanger
5 Handle 6 Releasebutton 7 Barrier 8 Indicator lamps
9 Mainpowerbutton 10 Shoulder harness - - - -
FUNCTIONAL
DESCRIPTION
WARNING: Always be sure that the tool is
switched o󰀨 and the battery cartridge is removed
before adjusting or checking function on the tool.
Failuretoswitcho󰀨andremovethebatterycartridge
mayresultinseriouspersonalinjuryfromaccidental
start-up.
Installing or removing battery
cartridge
CAUTION: Always switch o󰀨 the tool before
installing or removing of the battery cartridge.
CAUTION: Hold the tool and the battery car-
tridge rmly when installing or removing battery
cartridge.Failuretoholdthetoolandthebattery
cartridgermlymaycausethemtoslipo󰀨yourhands
andresultindamagetothetoolandbatterycartridge
andapersonalinjury.
►Fig.5: 1. Red indicator 2. Button 3.Batterycartridge
Toremovethebatterycartridge,slideitfromthetool
whileslidingthebuttononthefrontofthecartridge.
Toinstallthebatterycartridge,alignthetongueonthe
batterycartridgewiththegrooveinthehousingandslip
itintoplace.Insertitallthewayuntilitlocksinplace
withalittleclick.Ifyoucanseetheredindicatoronthe
uppersideofthebutton,itisnotlockedcompletely.
CAUTION: Always install the battery cartridge
fully until the red indicator cannot be seen. If not,
itmayaccidentallyfalloutofthetool,causinginjuryto
youorsomeonearoundyou.
CAUTION: Do not install the battery cartridge
forcibly.Ifthecartridgedoesnotslideineasily,itis
notbeinginsertedcorrectly.
Tool / battery protection system
Thetoolisequippedwithatool/batteryprotectionsystem.
Thissystemautomaticallycutso󰀨powertothemotorto
extendtoolandbatterylife.Thetoolwillautomatically
stop during operation and the indicator lamps light up if
thetoolisplacedunderoneofthefollowingconditions:
►Fig.6: 1. Indicator lamps
Indicator lamps Protection
status
Color
Lighted O󰀨
Blinking
Green
Overload
Red
Overheat
Red
Over-
discharge
Overload protection
Ifthetoolorbatterygetsintooneofthefollowingsitua-
tion,thetoolautomaticallystopsandtheindicatorlamp
startsblinkingingreen:
— Thetoolorbatteryisoverloadedbyentangled
weedsorotherdebris.
The tool is locked.
— Themainpowerbuttonisturnedonwhilethe
switchtriggerisbeingpulled.
In this situation, release the switch trigger and remove
thecauseofoverloadifnecessary.Afterthat,pullthe
switch trigger again to resume.
CAUTION: Before you remove the cause of
overload, be sure to turn the tool o󰀨.

Содержание

Похожие устройства

Скачать