Makita LXT BL 18 В DUX18Z [14/116] Assembly

Makita LXT BL 18 В DUX18Z [14/116] Assembly
14 ENGLISH
ASSEMBLY
WARNING: Always be sure that the tool is
switched o󰀨 and battery cartridge is removed
before carrying out any work on the tool.Failureto
switcho󰀨andremovethebatterycartridgemayresult
inseriouspersonalinjuryfromaccidentalstart-up.
WARNING: Never start the tool unless it is
completely assembled. Operation of the tool in a
partiallyassembledstatemayresultinseriousper-
sonalinjuryfromaccidentalstart-up.
Mounting the handle
Attachthehandlewithsuppliedclampsandbolts.Make
surethatthehandleislocatedbetweenthespacerand
the arrow mark. Do not remove or shrink the spacer.
►Fig.11: 1. Clamp 2.Hexsocketbolt3. Handle
4.Arrowmark5. Spacer
Whenusingthefollowingattachments,besuretoattach
thebarriertothehandleusingthescrewonthebarrier.
Grass trimmer attachment *
• Edgerattachment
*.Onlywhenmetalbladeisattached.
►Fig.12: 1. Barrier 2. Screw
Mounting the attachment pipe
CAUTION: Always check that the attachment
pipe is secured after installation. Improper instal-
lationmaycausetheattachmentfallingo󰀨fromthe
powerunitandcausepersonalinjury.
Mounttheattachmentpipetothepowerunit.
1. Turn the lever of the power unit toward the attach-
ment side.
►Fig.13: 1. Lever
2. Removethecapoftheattachment.Alignthepin
with the arrow mark and insert the attachment pipe until
thereleasebuttonpopsup.
►Fig.14: 1.Releasebutton2.Arrowmark3.Pin
3. Turn the lever toward the power unit side.
►Fig.15: 1. Lever
Makesurethatthesurfaceoftheleverisparalleltothe
pipe.
To remove the pipe, turn the lever toward the attach-
ment side and pull the pipe out while pressing down the
releasebutton.
►Fig.16: 1.Releasebutton2. Lever 3.Pipe
Adjusting the handle position
Adjustthehandlepositiontoobtaincomfortablehan-
dling of the tool.
Loosenthehexsocketheadboltonthehandle.Move
thehandletoacomfortableworkingpositionandthen
tightenthebolt.
►Fig.17: 1. Handle 2.Hexsocketheadbolt
Attaching the shoulder harness
WARNING: Be extremely careful to maintain
control of the tool at all times. Do not allow the
tool to be deected toward you or anyone in the
work vicinity.Failuretokeepcontrolofthetool
couldresultinseriousinjurytothebystanderandthe
operator.
CAUTION: When you use the tool in combi-
nation of the backpack-type power supply such
as portable power pack, do not use the shoulder
harness included in the tool package, but use the
hanging band recommended by Makita.
Ifyouputontheshoulderharnessincludedinthe
toolpackageandtheshoulderharnessoftheback-
pack-typepowersupplyatthesametime,removing
thetoolorbackpack-typepowersupplyisdi󰀩cultin
caseofanemergency,anditmaycauseanaccident
orinjury.Fortherecommendedhangingband,ask
MakitaAuthorizedServiceCenters.
CAUTION: Always use the shoulder harness
attached to the tool. Before operation, adjust the
shoulder harness according to the user size to
prevent fatigue.
CAUTION: Before operation, make sure that
the shoulder harness is properly attached to the
hanger on the tool.
1. Weartheshoulderharnessonyourleftshoulder.
►Fig.18
2. Clasp the hook on the shoulder strap to tool's
hanger.
►Fig.19: 1. Hanger 2. Hook
3. Adjusttheshoulderharnesstoacomfortable
working position.
►Fig.20
The shoulder harness features a means of quick
release.
Simplysqueezethesidesofthebuckletoreleasethe
tool from the shoulder harness.
►Fig.21: 1. Buckle
Hex wrench storage
CAUTION: Be careful not to leave the hex
wrench inserted in the tool head. Itmaycause
injuryand/ordamagetothetool.
When not in use, store the hex wrench as illustrated to
keepitfrombeinglost.
►Fig.22: 1. Handle 2. Hex wrench

Содержание

Похожие устройства

Скачать