Stiga SBC 500 AE 278200008/ST1 [175/587] Safety checks
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Stiga SBC 500 AE 278200008/ST1 [175/587] Safety checks

Stiga SBC 500 AE 278200008/ST1 [175/587] Safety checks
EN - 12
6.2 SAFETY CHECKS
Run the following safety checks and
check that the results correspond to
those outlined on the tables.
Always carry out the
safety checks before use.
6.2.1 General check
Object Result
Hand grips (Fig.
1.E; Fig. 1.F).
Clean, dry and xed
rmly to the machine.
Cutting means
guard (Fig. 1.D).
Correctly and securely t
to the machine, not worn/
deteriorated or damaged.
Harness connection
point (Fig. 1.I).
Correctly positioned.
Screws on the machine
and the cutting means.
Correctly tightened
(not loose).
Cutting means (Fig.
1.C.1; Fig. 1.C.2).
Clean, not damaged
or worn.
Metal blade (if tted)
(Fig. 1.C.2).
Sharp.
Battery (Fig. 1.K) No damage to the casing,
no liquid leakage.
Cooling air ducts
(paragraph 7.3).
Not clogged.
Machine No signs of damage
or wear.
Throttle control lever
(Fig. 7.A), throttle
safety lever (Fig. 7.B).
The levers must move
freely and not be forced.
Test driving No abnormal vibrations.
No abnormal sound.
6.2.2 Machine operating test
Action Result
1. Fit the battery inside its
housing (par. 7.2.3 );
2. press the safety
button (Fig. 7.C)
The LED (Fig. 7.E) must
come ON (electrical
circuit activated).
Action Result
1. Start the machine
(par. 6.3 );
2. simultaneously activate
the throttle control
lever (Fig. 7.A) and
the throttle safety
lever (Fig. 7.B);
3. release the throttle
control lever (Fig. 7.A)
and throttle safety
lever (Fig. 7.B).
1. The cutting means
must not move.
2. The cutting means
should move.
3. The levers should
return automatically
and rapidly to the
neutral position and
the cutting means
should stop.
Press only the throttle
control lever (Fig. 7.A).
The throttle control lever
remains blocked.
If any of the results fail to match
the indications provided in the tables
below, do not use the machine! Take
it to a service centre to be checked
and repaired if necessary.
6.3 START-UP
1. Remove the blade guard (Fig. 1.J) (if used);
2. make sure the cutting means is not
touching the ground or any other object;
3. t the battery inside its housing
correctly (par. 7.2.3);
4. press the safety button (Fig. 7.C),
5. simultaneously activate the throttle
control lever (Fig. 7.A) and throttle
safety lever (Fig. 7.B).
6.4 OPERATION
NOTE Before tackling a mowing job for the
rst time, get to know the machine, learn the most
suitable cutting techniques, make sure your wear
the harnesses correctly, grip the machine rmly
and make the movements required by the job.
To use the machine proceed as follows:
– always keep the machine connected to the
correctly worn harness (see par. 6.1.2).
– when working, the machine must always be
rmly held in both hands, keeping the power
unit on the right of the body and the cutting
unit below the line of the belt (Fig. 10).

Содержание

Похожие устройства

Скачать