Ecosoft ABSOLUTE с помпой на станине MO550PSECO [23/292] Installation procedure

Ecosoft Absolute 5-50P с помпой на станине MO550PSECOEXP [23/292] Installation procedure
22 23
This manual is the intellectual property of Ecoso. Copying and reprinng is prohibited. © 2016
ENG
1) Check that all parts are in the package. Do not open the plasc bags with lter parts before you
make sure everything is in place to be able to return faulty/incomplete package.
2) Check conformity of your local variables to requirements specicaons:
— verify that your product is as specied in paragraph 2.2;
— verify that your supply water quality** meets the requirements in paragraph 2.3.
**If supply water quality does not meet the requirements, it is necessary to consult with a water treatment specialist.
3) Before installing the system, make sure there is enough space for both the lter rack and the pres-
sure tank under the sink. In case there is not enough available space, pressure tank can be placed
in a separate locaon provided that the yellow tube’s length is sucient to connect it to the rest of
the system.
4) Electrical safety noce: This appliance should be connected into a circuit with an RCB installed
5) Install the system per the guidelines of this manual.
4.2. INSTALLATION PROCEDURE
CAUTION! This system has been tested by the manufacturer for leaks, so within the system the
presence of residual water is allowed.
Wash your hands thoroughly with an-bacterial soap before handling tubes, cartridges, and
membrane.
This system should desirably be installed in places protected from direct sunlight and away from
heang appliances.
REVERSE OSMOSIS SYSTEM INSTALLER AND USER GUIDE
4. STEPS FOR INSTALLING REVERSE OSMOSIS SYSTEM
Before installing a domesc reverse osmosis lter please carefully read this instrucon.
This system must be installed in compliance with local codes.
4.1. BEFORE COMMENCING INSTALLATION
Main pressure* Tank pressure* Supply water temperature*
Check water pressure at mains
before installing the product. Com-
pare to the requirements
in paragraph 2.2.
Check pressure in the tank bladder.
Compare to the requirements
in paragraph 2.2.
Check temperature of supply water.
Compare to the requirements in
paragraph 2.2.
*Refer to paragraph 2.2 for recommended measures in case any of the above variables does not meet the requirements.
1. Remove the reverse osmosis system from its packaging and check the equipment. Do not open the bag with compo-
nents. Note that you will not be able to claim missing parts if the bag is opened.
2. Shut o water supply in your kitchen or whole home and open water tap where you are about to install the system
(on your kitchen sink) for 1 minute to relieve pressure in the system, and then close it.

Содержание

Похожие устройства

Скачать