McCulloch M51-150WRPX 9673037-01 [70/420] Assembling and adjustments

McCulloch M51-150WRPX 9673037-01 [70/420] Assembling and adjustments
ASSEMBLING AND ADJUSTMENTS
70 – English
General
Handle
Assembly
Top handle
Place the handlebar’s tubular construction in direct
opposite to the lower part of the handlebar. Tighten the
knobs properly.
All but M40-125
M40-125
Use enclosed straps to secure cables to the handle. Do
not overstretch cables when mounting.
Settings
Handle height (all but M40-125)
Loosen the lower knobs.
Adjust the height. Tighten the knobs properly.
Cutting height
Move the lever to the back for higher cutting height and to
the front for lower cutting height.
M40-125, M46-125 has four controls, one for each wheel.
!
IMPORTANT! Prevent unintentional
starting by removing the ignition cable
from the spark plug.
NOTICE! Do not set the cutting height too low as there
is a risk that the cutters might hit ground with
unevenness.

Содержание

Похожие устройства

ASSEMBLING AND ADJUSTMENTS General Settings Handle height all but M40 125 IMPORTANT Prevent unintentional starting by removing the Ignition cable from the spark plug Loosen the lower knobs Handle Assembly Top handle Place the handlebar s tubular construction in direct opposite to the lower part of the handlebar Tighten the knobs properly All but M40 125 Adjust the height Tighten the knobs properly Cutting height NOTICE Do not set the cutting height too low as there is a risk that the cutters might hit ground with unevenness Move the lever to the back for higher cutting height and to the front for lower cutting height M40 125 M46 125 has four controls one for each wheel 70 English

Скачать