Monsher MOE 4592 черный/нержавеющая сталь [45/0] Electrical connectors

English

; Because oven handle and sheet metal parts are easy to cut, installers need to wear

gloves for installation.

Electrical Connectors

Warning

; The wiring of oven must be equipped with all-pole disconnection device according to

the wiring rules

; After installing the appliance, it is necessary to have other methods to disconnect the

power supply. The power supply is disconnected by a contactable plug or by a fixed

wiring switch that meets the wiring requirements.

Important information

The appliance is designed to be permanently installed with a three-pin power cord and

may only be connected by a licensed expert in accordance with the connection diagram.

Only a qualified electrician who takes the relevant regulations into account may replace

the power cord.

Do not use multiple plugs, power strips or extensions.Overloading causes a risk of fire.

If the connection is no longer accessible following installation, an all-pin isolating switch

with a contact gap of at least 3mm must be provided.

Connect the wires of the mains power cord in accordance with the following colour

coding:

Green and Earth wire

(E)

Yellow

Blue Neutral wire (N)

Brown Live (L)

Great Britain and Australia:

Do not connect the appliance using a 13 A plug or protect it with a 13 A fuse. The

appliance must be protected using a fuse that is rated 16 A or higher. The appliance must

be disconnected from the power supply during all installation work . When the appliance is

installed , protection must be provided against accidental contact in the future.