Magnit RACSCH-008E [12/31] Route of pipe
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Magnit RACSCH-008E [12/31] Route of pipe

Magnit RACSCH-008E [12/31] Страница 12

Содержание

Похожие устройства

fasten string at the central hole fasten string at the central hole af eaSf 250mm 440mm English at least 140mm at least 120mm at least 180mm plumb 120mm d 90mm Pipe hole Center of hole 0 65mm Pipe hole NOTICE The holes at solid arrow position must be secured to avoid the shake of mounting plate When the expansion bolts are used two holes 11 X20 or 11 X26 that the distance between them is 450mm should be adopted Confirm the position of holes and drill holes on the wall Diagram Wiring Open the front grille Remove the screw from electrical box cover pull the electrical box cover away from the unit and set aside Remove the screw from fastener pull the fastener away from the unit and set aside Connect the cable Replace the fastener and electrical box cover NOTE The appliance shall be installed in accordance with national wiring regulations The appliance must not be installed in the laundry The appliance must be installed 2 3m above the floor The appliance must be positioned so that the plug is accessible For some models whose cooling capacity are above 4600W 17000BTU h an all pole disconnection device which has at least 3mm separation distance in all pole and a residual current device RCD with the rating of above 10mA shall be incorporated in the fixed wiring according to the national rule Installation of the drain hose NOTE The drain hose must be arranged beneath the copper pipe The drain hose must not be hunched or twisted While wrapping up the drain hose do not pull it The drain hose through the room must be wrapped up by the thermal insulation materials The copper pipe and the drain hose must be wrapped up by felt strip Adiabatic pad should be used at where the pipe contacts the wall ROUTE OF PIPE If pipe comes out of the right side of the indoor unit cut part 1 of the unit If pipe comes out of the lower right side of the indoor unit cut part 2 of the unit If pipe comes out of the left side of the indoor unit cut part 3 of the unit 12 at least 80mm at least 120mm P90mm Center of hole 0 65mm 440mm

Скачать