Clatronic LB 3599 [32/62] Cleaning

Clatronic LB 3599 [32/62] Cleaning
32
If you do not use the appliance for longer periods of time,
remove the water from the tank and from the base appli-
ance. Allow the parts to dry.
Filling with water
CAUTION:
Do not pour any water into the opening of the nozzle.
1. To ll with water, lift the tank from the base unit and turn it
upside down. The ller hole is located underneath the tank.
2. Twist off the ller cap in the direction LOOSEN. Fill the
water into the tank up to approx. 3 centimeters below the
rim.
3. Close the ller cap again by twisting it in the FASTEN direc-
tion and put the tank back into the base appliance.
4. Attach the steam nozzle to the top of the tank.
Connection to a power supply
Before connecting the plug to a wall socket, verify the cor-
rect mains voltage. Refer to the specications on the rating
label of the device.
Connect the device to a certied socket only.
Once connected, the display lights up for approx. 2 sec-
onds and then turns off.
The device is in standby mode.
Buttons and display
ON/OFF: When pressing this button, the air humidier
starts operating at the lowest level.
Steam generated at the steam outlet will
be transported to the steam nozzle by fan
operation.
The current humidity and “OPERATING” will
appear in the display.
Press the button again to turn off the device.
MIST: (Mist) You can select 4 different steam settings
– from low to high. Press this button to select a
desired setting. The settings will appear in the
display.
HUMIDISTAT: Select the desired humidity setting.
Press this button and select a humidity setting
between 40 % and 95 % at increments of
5 %. The selected setting will briey ash
in the display. The display will then show
“HUMIDISTAT” and the current humidity.
Once the preset setting has been reached,
the device will turn off and then control the
humidity automatically.
DELAYSTART: Start the device with a timer.
Turn on the device and adjust the settings as
desired. Then press the DELAYSTART button.
Select a timer setting between 1 and 24 hours.
The display will show the time left till start-up.
In order to cancel this function, press the ON/
OFF button to turn off the device.
AUTO-OFF: Let the device turn off automatically after a
period of 1 to 24 hours.
When turned on, press the AUTO-OFF button.
Select a time between 1 and 24 hours. The
current humidity and the time left till shutdown
will be alternating in the display.
In order to cancel this function, press the ON/
OFF button to turn off the device.
ANION: Negative ions support the well-being of
humans. They can, for example, help with the
dissipation of electrostatic charges.
To use this function, press the ANION button.
The display will indicate the function.
The ANION function will only work in
combination with the fan and steam generator.
WATERLESS = Lack of water
When this indicator lights up, you have to ll in
more water. See “Filling with water ”.
Terminating operation
1. Switch off the appliance.
2. Disconnect the mains plug from the socket.
3. Completely empty the appliance if you do not want to use it
for a long period of time.
Cleaning
WARNING:
Always remove the plug before cleaning.
Do not immerse the base appliance in water for cleaning
under any circumstances. Otherwise this might result in
an electric shock or re.
CAUTION:
Do not use a wire brush or any abrasive items.
Do not use any acidic or abrasive detergents.
Do not use any chemical cleaning products.
Do not damage the ultrasound probe at the bottom of the
base appliance!
Base appliance
Wipe the casing with a damp cloth. Then wipe it with a dry
cloth.
The area on which the tank stands should be cleaned once
per week.
1. Wipe the area with a damp cloth. Use some drops of
household vinegar if necessary, and allow to work for
about 5 minutes.
2. Moisten a cotton bud with vinegar. Use it to care-
fully wipe the ultrasound probe until any limescale is
completely removed.
3. Then wipe the appliance once more.

Содержание

Похожие устройства

Скачать
Случайные обсуждения

Ответы 1

Как залить воду
4 года назад