Suzuki GSX-R600 (2001-2002) Инструкция по эксплуатации онлайн [10/399] 114729

Содержание

GENERAL INFORMATION 1 3 A CAUTION If parts replacement is necessary replace the parts with Suzuki Genuine Parts or their equiva lent When removing parts that are to be reused keep them arranged in an orderly manner so that they may be reinstalled in the proper order Be sure to use special tools when instructed Make sure that all parts used in reassembly are clean Lubricate them when specified Use the specified lubricant bond or sealant When removing the battery disconnect the negative cable first and then the positive cable When reconnecting the battery connect the positive cable first and then the negative cable and cover the positive terminal with the terminal cover When performing service to electrical parts disconnect the battery negative cable unless the service procedure requires the battery power When tightening cylinder head and crankcase bolts and nuts tighten the larger sizes first Always tighten the bolts and nuts diagonally from the inside working out and to the specified tightening torque Whenever you remove oil seals gaskets packing O rings locking washers self locking nuts cotter pins circlips and certain other parts as specified be sure to replace them with new ones Also before installing these new parts be sure to remove any left over material from the mating surfaces Never reuse a circlip When installing a new circlip take care not to expand the end gap larger than required to slip the circlip over the shaft After installing a circlip always ensure that it is completely seated in its groove and securely fitted Use a torque wrench to tighten fasteners to the specified torque Wipe off grease and oil if a thread is smeared with them After reassembling check parts for tightness and proper operation To protect the environment do not unlawfully dispose of used motor oil engine coolant and other fluids batteries and tires To protect the earth s natural resources properly dispose of used motorcycles and parts