Konica Minolta bizhub PRO 920P [22/44] Paper information

Precautions for installation and use

2-14 bizhub PRO 920 Additional Information

2.7 Paper information

Finisher FS-509 provides the following functions.

- Straight delivery using primary (main) tray: Outputs sorted/grouped sets

normally to the primary (main) tray.

- Straight delivery using secondary (sub) tray: Outputs sorted/grouped

sets normally to the secondary (sub) tray.

- Offset delivery: Outputs sorted/grouped sets to the primary (main) tray,

having each set offset by approx. 30 mm upon exit.

- Staple delivery: Staples each set with one staple at the corner or two sta-

ples along the edge.

Punch mode is available using Finisher FS-509 with Punch kit PK-504/505

installed.

Z-Fold and Punch modes are available using Finisher FS-509 with Z folding

unit ZU-601/602 installed.

Sheet insertion is available using Finisher FS-509 with Post inserter PI-501

installed.

For paper information of each option, see Section 3 of the bizhub PRO 920

User’s Guide - Copier.

Note

Finisher FS-509 is provided with two types of staple cartridge. Using 50-

sheet-staple cartridge, up to 50 sheets can be stapled. Using100-sheet-

staple cartridge, up to 100 sheets can be stapled.

Primary (main) tray capacity depends on the paper size and number of

stapled sheets. Heed the limits by referring to the table below.

Straight delivery Offset delivery Staple delivery

Weight 50 g/m

to 200 g/m

Quantity Secondary (sub) tray: 200 sheets

Primary (main) tray:

500 sheets (A5, A5R, 5.5"×8.5", 5.5"×8.5"R)

3,000 sheets (A4, A4R, B5, B5R, 8.5"×11",

8.5"×11"R)

1,500 sheets (A3, B4, 11"×17", 8.5"×14")

1,000 sheets max.

* See the table below for

details.

Size Max. 314 × 458 mm ~ min. 100 × 148 mm