Home
Главная
Konica Minolta
Факсы
Fax 1510
Инструкция по эксплуатации Страница: 11

Konica Minolta Fax 1510 [11/44] Installation 1 installation

1. Installation

Chapter 1. Installation

11 It may take a moment to update the cartridge. When

the process is completed, the following appears on

the display:

action completed / remove card

12 Pull the Plug’n’Print card out of the fax machine.

You can interrupt the recharging process at any time by

simply pressing STOP. However, the toner level memo-

ry must be updated for each new toner cartridge. If you

have pressed the STOP key by mistake, you can restart

the recharging process as follows:

1 Press MENU/OK,

and OK

2 Select new black with

, and conﬁ rm with

OK. Select yes with

. After a short time, the fax

machine will ask you to insert the Plug’n’Print card.

If the toner level of your cartridge is low, then every time

you open and close the cover, the following question will

appear on the display: black=new? If you have not

installed a new cartridge, press STOP. If you have in-

stalled a new cartridge, press OK and follow the descrip-

tion set forth above.

Displaying the Toner Level

Whenever you insert a new toner cartridge,

you must update the toner level memory of

your fax machine with the Plug’n’Print card that is

included with the new cartridge. Your fax machine

registers the extent of toner usage for every print-

out and calculates the toner level of the cartridge

based on this.  e indicated toner level is only

meaningful if you update each new toner cartridge

with the Plug’n’Print card provided.

1 Press MENU/OK,

and OK.

2 Select cart capacity with

and conﬁ rm

with OK.  e toner level of the toner cartridge is

indicated by a percentile value between 100 percent

(full) and 0 percent (empty).

3 Pressing C will return you to the previous menu step;

pressing STOP will return you to the root menu.

Paper

Before your fax machine will be ready to make copies or

receive faxes, you must load paper into the machine. Use

the following paper size: A4, 210 × 297 millimetres. Your

fax machine works with normal copier paper and with

typewriter paper (60 to 90 g/m

Loading Paper

1 Pull out the paper tray.

2 Separate the paper sheets by fanning them out,

then align them by tapping edge of the stack lightly

against a ﬂ at surface.  is will prevent several sheets

of paper from being drawn in all at once.

3 Remove the cover from the paper tray. Put in only as

much paper as will ﬁ t under the raised limit mark-

ers on the upper edge of the paper tray (see also the

drawings on the cover of the paper tray). You can

load up to 250 sheets into the paper tray.

Konica Minolta Fax 1510 [11/44] Installation 1 installation

Содержание

Похожие устройства