Home
Главная
Asko
Посудомоечная Машина
D5436 S
Инструкция по эксплуатации Страница: 13

Asko D5436 S [13/24] Troubleshooting

Troubleshooting

ActionType of faultDisplay

Call the service division.Overfilling

See "Water remains in the dishwasher" in the table

below.

Water outlet fault

Check that the water tap is on.Water inlet fault

Check whether dishwasher inlet hose is connected to

a pressure limiting valve (some pressure limiting valves

may restrict the supply of water to the dishwasher).

Turn off the water tap and call the service division.Inlet valve leakage

Turn off the machine with the main power switch and then turn it on again to clear the error message from the display.

ActionPossible causesProblem

Remove the arms and clean them.The spray arms do not rotate.The dishes are not clean.

Check that the dishes are not blocking the

spray arms.

Avoid large packages.Old detergent. Detergent is a perishable

product.

Dose according to water hardness. Far too

much or far too little detergent results in

poorer dishwashing results.

Incorrect detergent dosage.

Select a higher temperature or a more pow-

erful program.

Dishwashing program too weak.

Do not cover porcelain with large bowls or

the like. Avoid placing very tall glasses in the

corners of the baskets.

Dishes loaded incorrectly.

Place dishes to sit steady.Glasses and cups have toppled over during

the program.

Screw the filter firmly into place. See the

section Care and cleaning.

The filter is not correctly fitted.

See the sections Before washing for the first

time and Settings.

Incorrect rinse aid dosage setting.Spots or films on the dishes.

Wash crystal at a low temperature and with

a conservative amount of detergent. Contact

the detergent manufacturer.

Too high temperature and/or too much deter-

gent can cause etching on crystal. Unfortu-

nately, this cannot be repaired, only prevent-

ed.

Reduce the amount. See the sections Before

washing for the first time and Settings. If you

have very soft water, you may want to dilute

the rinse aid 50:50 with water.

Rinse aid dosage setting too high.The dishes have a sticky white/blue film.

Rinse off these types of foodstuffs if not

starting the dishwasher immediately. Why

not use the Rinse & Hold program.

Some foodstuffs, such as mustard, mayon-

naise, lemon, vinegar, salt and dressings,

can mark stainless steel if left for too long.

Spots on stainless steel or silver.

Silver and stainless steel items should not

come into contact during dishwashing.

All stainless steel can cause spots on silver

if they come into contact during dishwashing.

Aluminium can also cause spots on dishes.

Use a detergent with a bleaching agent.Lipstick and tea can be difficult to wash off.Spots left after washing.

Asko D5436 S [13/24] Troubleshooting

Содержание

Похожие устройства