Suunto Cobra2 [28/56] Ascent rate indicator
![Suunto Cobra2 [28/56] Ascent rate indicator](/views2/1013667/page28/bg1c.png)
Low Air Pressure Warnings
The dive computer will warn you with three audible double beeps and a blinking pressure
display when the cylinder pressure reaches 50 bar/725 psi.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
Three double beeps are also heard when the cylinder pressure goes down to the user-
selected alarm pressure and when the remaining air time reaches zero.
6.1.4. Ascent rate indicator
The ascent rate is show graphically along the right hand side. When the maximum allowed
ascent rate is exceeded, the lower segments start to blink with the top segment staying
solid, indicating that the maximum ascent rate has been exceeded continuously or that
the current ascent rate is significantly above the allowed rate.
NORMAL
ASCENT
RATE.
ACTIVATED BACKLIGHT,
ALARM AND A BLINKING ASCENT
RATE BAR GRAPH INDICATE YOU
ARE ASCENDING FASTER THAN 10
M/MIN. YOU ARE ADVISED TO
MAKE A MANDATORY SAFETY
STOP WHEN YOU REACH A
DEPTH OF 6 M.
WARNING
DO NOT EXCEED THE MAXIMUM ASCENT RATE! Rapid ascents
increase the risk of injury. You should always make the Mandatory
and Recommended Safety Stops after you have exceeded the
maximum recommended ascent rate. If this Mandatory Safety Stop
is not completed, the decompression model will penalize your next
dive(s). Continuous ascent rate violations will result in Mandatory
Safety Stops. When Recommended Deep Stop is enabled, the length
is indicated in seconds.
6.1.5. Safety Stops
A 3 minute Recommended Safety Stop is prompted after every dive to over 10m.
6.1.6. Decompression dives
When your NO DEC TIME becomes zero, your dive becomes a decompression dive so
you must perform one or more decompression stops on your way to the surface. The NO
DEC TIME on your display will be replaced by an ASC TIME, and a CEILING notation will
appear. An upward pointing arrow will also prompt you to start your ascent.
If you exceed the no-decompression limits on a dive, the dive computer will provide the
decompression information required for ascent. After this, the instrument will continue to
provide subsequent interval and repetitive dive information.
Rather than requiring you to make stops at fixed depths, the dive computer lets you
decompress within a range of depths (continuous decompression).
The ascent time (ASC TIME) is the minimum amount of time needed to reach the surface
in a decompression dive. It includes:
•
the time needed to ascend to the ceiling at an ascent rate of 10 m per minute/33 ft per
minute. The ceiling is the shallowest depth to which you should ascend
•
the time needed at the ceiling
28
Содержание
- Table of contents 3
- Welcome to the world of suunto diving instruments 5
- Warnings cautions and notes 6
- Button symbols and functions 9
- Navigating in the menus 9
- Suunto cobra2 at a glance 9
- Getting started with your suunto cobra2 11
- Setting the alarm 11
- Setting the date 11
- Setting the time 11
- Time mode settings 11
- Ac water contacts 12
- Setting the backlight 12
- Setting the tones 12
- Setting the units 12
- Compass display 13
- Learning how to use your compass 13
- Tilt sensor 13
- Compass settings 14
- Declination 14
- Locking a bearing 14
- Calibration 15
- Before diving 16
- Dive computer limitations 16
- Emergency ascents 16
- The suunto rgbm deep stop algorithm 16
- Audible and visual alarms 17
- Nitrox 17
- Air integration 18
- Error conditions 18
- Connecting suunto cobra2 to a regulator 19
- Dive mode settings 19
- Setting the depth alarm 19
- Setting the dive time alarm 19
- Setting the nitrox values 20
- Setting the personal altitude adjustments 20
- Accessing dive mode 21
- Activation and pre checks 21
- Setting the rgbm values 21
- Setting the safety stops deep stops 21
- Setting the sample rate 21
- Battery power indication 22
- Dive mode activation 22
- Diving at altitude 23
- Personal adjustments 23
- Recommended safety stops 24
- Safety stops 24
- Deep stops 25
- Mandatory safety stops 25
- Basic dive data 26
- Diving 26
- Diving in air mode diveair 26
- Bookmark 27
- Tank pressure data 27
- Ascent rate indicator 28
- Decompression dives 28
- Safety stops 28
- Ceiling ceiling zone floor and decompression range 29
- Display below the floor 29
- Display above the ceiling 30
- Display above the floor 30
- Display at the ceiling zone 30
- Before diving in nitrox mode 31
- Default nitrox settings 31
- Diving in nitrox mode divenitrox 31
- Oxygen displays 31
- Diving in gauge mode divegauge 32
- Gas change and multiple breathing gas mixes 32
- Oxygen limit fraction olf 32
- After diving 34
- Dive numbering 34
- Repetitive dive planning 34
- Surface interval 34
- Dive planning mode plannodec 35
- Flying after diving 35
- Plan mode 35
- Dive numbering shown during dive planning 36
- Dive simulator 36
- Simulation mode plansimulator 36
- Dive logbook memlogbook 37
- Memory mode 37
- Dive history memhistory 38
- Suunto dive manager sdm 38
- Www suuntosports com and suunto diving world at www suunto com diving 39
- Care and maintenance 40
- Care of your dive computer 40
- Maintenance 40
- Water contacts and buttons 40
- Battery kit 41
- Battery replacement 41
- Battery replacement procedure 41
- Required tools 41
- Water resistance inspection 41
- Technical data 44
- Technical specifications 44
- Suunto rgbm adaptive decompression 45
- No decompression limits 46
- Altitude diving 47
- Oxygen exposure 47
- Copyright 48
- Intellectual property 48
- Patent notice 48
- Trademark 48
- After sales service 49
- Disclaimers 49
- Limits of liability and iso 9001 compliance 49
- User s responsibility 49
- Warranty 50
- Disposal of the device 51
- Glossary 52
- Two year warranty 55
Похожие устройства
- Yamaha PSR-E213 Инструкция по эксплуатации
- Texas Lilli 572 B Инструкция по эксплуатации
- Mystery MGM-1450 Инструкция по эксплуатации
- Siemens SK76M530EU Инструкция по эксплуатации
- JVC TH-A10R Инструкция по эксплуатации
- Suunto Cobra Инструкция по эксплуатации
- Yamaha PSR-E223 Инструкция по эксплуатации
- Champion ВC7712 Инструкция по эксплуатации
- Loewe Assist Multi-Control Инструкция по эксплуатации
- Bosch MFW 1501 Инструкция по эксплуатации
- Panasonic WV-SF330 Инструкция по эксплуатации
- Hyundai H-HT5114-N Инструкция по эксплуатации
- Yamaha PSR-E303 Инструкция по эксплуатации
- Supra MGS 1350 Инструкция по эксплуатации
- Elitech КБ 60 Инструкция по эксплуатации
- Loewe Auro 2216 Инструкция по эксплуатации
- Yamaha PSR-E313 Инструкция по эксплуатации
- Panasonic WV-SP300 Инструкция по эксплуатации
- Hyundai H-HT5113-N Инструкция по эксплуатации
- Champion ВC 6611 Инструкция по эксплуатации