Suunto Cobra2 — dive Computer Technical Specs: Depth Gauge, Accuracy, EN 13319, RGBM Algorithm [44/56]
Превью страниц
Страница 44 /
56
9. TECHNICAL DATA
9.1. Technical specifications
Dimensions and weight:
• Diameter: width 73 mm/2.85 in, length 165 mm/6.50 in
• Thickness: 35 mm/1.40 in
• Weight: 210 g/7.4 oz (without hose)
Depth gauge:
• Temperature compensated pressure sensor
• Salt water calibrated, in fresh water the readings are about 3% smaller (calibrated in
compliance with EN 13319)
• Maximum depth of operation: 100 m/328 ft (complying with EN 13319)
• Accuracy: ± 1% of full scale or better from 0 to 80 m/262 ft at 20°C/68°F (complying
with EN 13319)
• Depth display range: 0 to 150 m/492 ft
• Resolution: 0.1 m from 0 to 100 m/1 ft from 0 to 328 ft
Temperature display:
• Resolution: 1°C/1°F
• Display range: -20 to +50°C/-9 to +122°F
• Accuracy: ± 2°C/± 3.6°F within 20 minutes of temperature change
Calendar clock:
• Accuracy: ± 25 s/month (at 20°C/68°F)
• 12/24 h display
Displays only in NITROX mode:
• Oxygen %: 21 - 99
• Oxygen partial pressure display: 0.2 - 3.0 bar, depending on the limit setting
• Oxygen Limit Fraction: 1 - 200% with 1% resolution
Logbook/dive profile memory:
• Recording interval: 20 seconds adjustable (1,10,20,30,60s).
• Memory capacity: approximately 42 hours of diving with 20 second recording interval
• Depth accuracy: 0.3 m/1 ft
Operating conditions:
• Normal altitude range: 0 to 3,000 m/10,000 ft above sea level
• Operating temperature: 0°C to 40°C/32°F to 104°F
• Storage temperature: -20°C to +50°C/ -4°F to +122°F
It is recommended that the instrument be stored in a dry place at room temperature.
NOTE
Do not leave the dive computer in direct sunlight!
Tissue calculation model:
• Suunto Deep Stop RGBM algorithm (developed by Suunto and Bruce R. Wienke, BSc,
MSc, PhD)
• 9 tissue compartments
• Tissue compartment halftimes: 2.5, 5, 10, 20, 40, 80, 120, 240 and 480 minutes (on
gassing). The off gassing halftimes are slowed down
• Reduced gradient (variable) "M" values based on diving habit and dive violations. The
"M" values are tracked up to 100 hours after a dive
• The EAN and oxygen exposure calculations are based on recommendations by R.W.
Hamilton, PhD and currently accepted exposure time limit tables and principles
Battery:
• One 3 V lithium battery: CR 2450
• Battery storage time (shelf life): Up to three years
• Replacement: Every three years, or more often depending on dive activity
44
Содержание
111- Table of contents
- Welcome to the world of suunto diving instruments
- Warnings cautions and notes
- Navigating in the menus
- Suunto cobra2 at a glance
- Button symbols and functions
- Time mode settings
- Setting the time
- Setting the date
- Setting the alarm
- Getting started with your suunto cobra2
- Setting the units
- Setting the tones
- Setting the backlight
- Ac water contacts
- Compass display
- Tilt sensor
- Learning how to use your compass
- Locking a bearing
- Declination
- Compass settings
- Calibration
- The suunto rgbm deep stop algorithm
- Emergency ascents
- Dive computer limitations
- Before diving
- Nitrox
- Audible and visual alarms
- Error conditions
- Air integration
- Connecting suunto cobra2 to a regulator
- Setting the dive time alarm
- Setting the depth alarm
- Dive mode settings
- Setting the personal altitude adjustments
- Setting the nitrox values
- Setting the sample rate
- Setting the safety stops deep stops
- Setting the rgbm values
- Activation and pre checks
- Accessing dive mode
- Dive mode activation
- Battery power indication
- Personal adjustments
- Diving at altitude
- Safety stops
- Recommended safety stops
- Mandatory safety stops
- Deep stops
- Diving in air mode diveair
- Diving
- Basic dive data
- Tank pressure data
- Bookmark
- Safety stops
- Decompression dives
- Ascent rate indicator
- Display below the floor
- Ceiling ceiling zone floor and decompression range
- Display at the ceiling zone
- Display above the floor
- Display above the ceiling
- Before diving in nitrox mode
- Oxygen displays
- Diving in nitrox mode divenitrox
- Default nitrox settings
- Oxygen limit fraction olf
- Gas change and multiple breathing gas mixes
- Diving in gauge mode divegauge
- Surface interval
- Repetitive dive planning
- Dive numbering
- After diving
- Plan mode
- Flying after diving
- Dive planning mode plannodec
- Simulation mode plansimulator
- Dive simulator
- Dive numbering shown during dive planning
- Memory mode
- Dive logbook memlogbook
- Suunto dive manager sdm
- Dive history memhistory
- Www suuntosports com and suunto diving world at www suunto com diving
- Water contacts and buttons
- Maintenance
- Care of your dive computer
- Care and maintenance
- Water resistance inspection
- Required tools
- Battery replacement procedure
- Battery replacement
- Battery kit
- Technical specifications
- Technical data
- Suunto rgbm adaptive decompression
- No decompression limits
- Oxygen exposure
- Altitude diving
- Trademark
- Patent notice
- Intellectual property
- Copyright
- User s responsibility
- Limits of liability and iso 9001 compliance
- Disclaimers
- After sales service
- Warranty
- Disposal of the device
- Glossary
- Two year warranty
Похожие устройства
-
Suunto CobraИнструкция по эксплуатации -
Suunto Cobra3Инструкция по эксплуатации -
Suunto ComboИнструкция по эксплуатации -
Suunto D4iИнструкция по эксплуатации -
Suunto D6Инструкция по эксплуатации -
Suunto D6iИнструкция по эксплуатации -
Suunto D9Инструкция по эксплуатации -
Suunto D9txИнструкция по эксплуатации -
Suunto GekkoИнструкция по эксплуатации -
Suunto HelO2Инструкция по эксплуатации -
Suunto StingerИнструкция по эксплуатации -
Suunto VyperИнструкция по эксплуатации
Detailed technical specifications for a diving computer including depth measurement, pressure sensor, battery life, and tissue model compliance with EN 13319 standards.