Suunto Cobra2 Инструкция по эксплуатации онлайн [8/56] 12843

WARNING

SELECT THE CORRECT ALTITUDE ADJUSTMENT SETTING! When

diving at altitudes greater than 300 m/1,000 ft the Altitude Adjustment

feature must be correctly selected in order for the computer to

calculate the decompression status. The dive computer is not intended

for use at altitudes greater than 3,000 m/10,000 ft. Failure to select

the correct Altitude Adjustment setting, or diving above the maximum

altitude limit will result in erroneous dive and planning data.

WARNING

SELECT THE CORRECT PERSONAL ADJUSTMENT SETTING!

Whenever it is believed that factors that tend to increase the possibility

of DCI exist, it is recommended that you use this option to make the

calculations more conservative. Failure to select the correct Personal

Adjustment setting will result in erroneous dive and planning data.

WARNING

This device contains a Lithium cell battery. To reduce the risk of fire

or burns, do not disassemble, crush, puncture, short external contacts,

or dispose of in fire or water. Replace only with manufacturer-specified

batteries. Recycle or dispose of used batteries properly.

NOTE

It is not possible to change between AIR, NITROX and GAUGE modes

before the instrument has counted down the no-fly time.

There is one exception to this: You can change from AIR to NITROX

mode even during the no-fly time. When planning both air and nitrox

dives during the same dive series, you should set the instrument in

NITROX mode and modify the gas mix accordingly.

In GAUGE mode, the no-fly time is always 48 hours.