Antari HZ-100 [3/28] Unpacking inspection

♦ For adult use only. Hazer must be installed out of the reach of children. Never leave

the unit running unattended.

♦ Position the haze machine in well-ventilated area. Please leave about 20cm spaces

surrounding the machine.

♦ Never aim the machine at open flames or close to flammable items.

♦ Never add flammable liquids of any kind (oil, gas, perfume) to the hazer liquid.

♦ Use only dealer recommended Antari high-quality hazer liquid (HZL). Please do not

use any other liquid which may cause erosion of inner parts.

♦ If your Antari Hazer fails to work properly, discontinue use immediately. Drain all

hazer liquid from the tank, pack the unit securely (preferably in the original packing

material), and return it to your ANTARI dealer for service.

♦ Please note before sending the machine for transporting purpose, make sure the liquid

inside the tank is fully emptied.

♦ Never drink hazer liquid. If it is ingested, call a doctor immediately. If hazer liquid

comes in contact with skin or eyes, rinse thoroughly with water.

Pay attention to all warning labels and instructions printed on the exterior of your Antari

Hazer

•Unpacking & Inspection

Open the shipping carton and verify that all equipment necessary to operate the system has

arrived intact. Before beginning initial setup of your ANTARI Hazer, make sure that there

is no evident damage caused by transportation. In the event that the unit’s housing or cable

is damaged, do not plug it in and do not attempt to use it until after contacting your Antari

dealer for assistance.

•Setup

1. Remove all packing materials from the shipping box. Check that all foam and plastic

padding is removed.

2. Place hazer on a flat surface and remove hazer liquid tank cap.

3. Your hazer may come with standard Timer remote HC-1 or Wireless HCR-1 remote

(except HZ-100, which will come separately). If you will be controlling your unit

remotely, firmly attach the remote control cable to the proper position.