Caiman NEMH20 DELUXE [12/16] Set up

User manual

SeTTinGS - STaTiSTicS

Displays information on the work performed by the robot during its operation.

SeT UP

1. Set and check the robot programming.

2. Check and clean the lters.

3. Place the robot inside the pool; refer to “Positioning robot in charging base”.

4. The robot starts is work cycle according to the settings programmed.

ordinary cleaninG

Clean the lter frequently, and then less frequently in relation to the dirt found in the lter. The frequency of cleaning depends on

several factors: size of the pool, the ease with which it gets dirty, the frequency of use, etc.

Use the retrieving hook to bring the robot to the surface.

Wait for the turbines to stop working.

Remove the robot gently from the water, grasping it by the handle on the retrieving hook, and place it on the ground.

Wait for it to emit four consecutive beeps to conrm that the robot is off.

Unhook the fastening clips of the bonnet.

Lift the bonnet and remove the lters to be cleaned.